{"title":"Belts \u0026 Accessory Drive","description":"\u003cdiv class=\"collection-description\"\u003e\n\u003ch2\u003eAccessory Drive Belts \u0026amp; Brackets — LS Swap and Performance Solutions\u003c\/h2\u003e\n\u003cp\u003eThe accessory drive system — the belt, tensioner, and bracket arrangement that drives the alternator, power steering pump, and air conditioning compressor from the crankshaft — is one of those areas that can make or break the presentation and functionality of an engine swap. On a factory installation, everything fits because it was designed to. Drop an LS engine into a classic truck or hot rod and suddenly you're dealing with the integration challenge of mounting modern accessories in a space designed around a very different engine architecture.\u003c\/p\u003e\n\u003cp\u003eWith 101 products focused predominantly on Holley's comprehensive LS accessory drive range, Billy's Speed Shop has the brackets, belt kits, and tensioner components to build a clean, functional accessory drive on your LS swap or engine build.\u003c\/p\u003e\n\u003ch3\u003eLS Accessory Drive Systems — High and Low Mount Configurations\u003c\/h3\u003e\n\u003cp\u003eThe Holley accessory drive range addresses the challenge of LS engine installation with two primary configurations: high-mount systems that position the alternator at the top of the engine in a position similar to traditional Small Block Chevy layouts, and mid-mount systems that keep the accessories tighter to the engine for improved fitment in tight engine bays. Both systems are available with and without air conditioning provisions, with and without power steering, allowing you to configure exactly the accessory setup your build requires.\u003c\/p\u003e\n\u003cp\u003eThese systems are more than just brackets — they're engineered accessory drive solutions that include all mounting hardware, correctly sized belt specifications, and tensioner arrangements that maintain proper belt tension without the improvisation that characterised early LS swap accessory drive solutions. The result is an engine that looks like it belongs in the vehicle, with reliable accessory function and a professional appearance.\u003c\/p\u003e\n\u003ch3\u003eTensioner Pulleys and Belt Components\u003c\/h3\u003e\n\u003cp\u003eTensioner pulleys and idler pulleys are wear items that should be replaced as part of any complete belt service or when building a new accessory drive system. Correct tensioner function maintains belt tension throughout the operating temperature range and belt stretch that occurs with use — a seized or worn tensioner causes belt slip, accessory failure, and in worst cases belt-off events that can result in engine overheating within minutes.\u003c\/p\u003e\n\u003c\/div\u003e","products":[{"product_id":"20-131bk","title":"LS\/LT High-Mount Accessory Drive Bracket - A\/C, P\/S \u0026 Alt Brackets\n- works with R4 compressor","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eNOTE: This bracket REQUIRES an installation kit for assembly (Part 21-1, 21-2, OR 21-3, see Fitment Guide below for the correct installation kit for your application).\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eHolley is pleased to offer simple, clean, cost effective solutions that solve the accessory drive challenges encountered when swapping a GM LS engine into a muscle car, truck, hot rod or other vehicle. These brackets were designed to deliver a factory style appearance, correct belt alignment and factory stability.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eKey Features: •\tThe most cost effective LS bracket solution on the market!\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003e•\tUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products •\tSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets •\tUtilizes commonly available and affordable GM alternators, power steering pumps and A\/C compressors •\tA\/C brackets position the compressor high above the cross-member but below the hood line for easy installation and great looks •\tA\/C brackets are also a bolt on solution to relocate A\/C compressor on engines using a GM Corvette accessory drive system •\tA\/C bracket accepts GM R4 compressor (Sanden version now available) •\tOEM spec flanged head hardware included to match your factory LS engine hardware •\tComplete accessory drive kits include all components and accessories are also available •\tIdeal for crate engines, take out motors and engine builders!\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eHolley's kits supply the required brackets and hardware needed for installation, but allow you to choose the source for supplemental accessories and components that are often already on the donor engine or host vehicle. Whether sourcing from the salvage yard, the local auto parts store, your GM parts dealer, or Holley, you pick the accessories that match your needs and budget!\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eA Fitment And Required Components Guide helps you locate and source components and provides other notes and helpful hints. Three easy steps will get you going. Step one is to determine your belt alignment based on your crank pulley position on the engine you have. Step two is to choose the Holley accessory drive brackets that you need (A\/C, Alt \u0026amp; P\/S or both). Step three is to see which Holley installation kit your set-up requires to line up your accessories with your crank pulley position. An application specific installation kit (part # 21-1, 21-2, or 21-3) is REQUIRED for most applications.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eBLACK LS ACCESSORY DRIVE BRACKET - A\/C, P\/S \u0026amp; ALT BRACKETS\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eThe most cost effective LS bracket solution on the market!\u003c\/li\u003e\n      \u003cli\u003eUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n      \u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n      \u003cli\u003eUtilizes commonly available and affordable GM alternators, power steering pumps and A\/C compressors\u003c\/li\u003e\n      \u003cli\u003eA\/C brackets position the compressor high above the cross-member but below the hood line for easy installation and great looks\u003c\/li\u003e\n      \u003cli\u003eA\/C brackets are also a bolt on solution to relocate A\/C compressor on engines using a GM Corvette accessory drive system\u003c\/li\u003e\n      \u003cli\u003eA\/C bracket accepts GM R4 compressor (Sanden version now available)\u003c\/li\u003e\n      \u003cli\u003eOEM quality natural finish die castings for clean looks and durability. Can be polished, coated, painted or plated.\u003c\/li\u003e\n      \u003cli\u003eOEM spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n      \u003cli\u003eComplete accessory drive kits include all components and accessories are also available\u003c\/li\u003e\n      \u003cli\u003eIdeal for crate engines, take out motors and engine builders!\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559898943782,"sku":"20-131bk","price":388.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-131cadlarge_79dfc935-8de0-44ac-bb1d-a2f2329e702d.jpg?v=1777050616"},{"product_id":"20-132","title":"LS\/LT High-Mount Accessory Drive Bracket - Passenger's \u0026 Driver's Side Brackets","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    Alt, P\/S \u0026amp; A\/C- Fits Sanden SD508 or SD7 Comp.\u003cul\u003e\n\u003cli\u003eThe most cost effective LS bracket solution on the market!\u003c\/li\u003e\n\u003cli\u003eUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n\u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n\u003cli\u003eUtilizes commonly available and affordable GM alternators, power steering pumps and A\/C compressors\u003c\/li\u003e\n\u003cli\u003eA\/C brackets position the compressor high above the cross-member but below the hood line for easy installation and great looks\u003c\/li\u003e\n\u003cli\u003eA\/C brackets are also a bolt on solution to relocate A\/C compressor on engines using a GM Corvette accessory drive system\u003c\/li\u003e\n\u003cli\u003eA\/C bracket accepts GM R4 compressor (Sanden version now available)\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559899074854,"sku":"20-132","price":426.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/048a96818a3aa3afa6765d02590c47a506e27cc3_a8de1a19-96ee-4b30-ae21-0a5ba9c0d228.jpg?v=1757067578"},{"product_id":"20-132bk","title":"LS\/LT High-Mount Accessory Drive Bracket\n- Passenger's \u0026 Driver's Side Brackets Black","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eHolley is pleased to offer simple, clean, cost effective solutions that solve the accessory drive challenges encountered when swapping a GM LS engine into a muscle car, truck, hot rod or other vehicle. These brackets were designed to deliver a factory style appearance, correct belt alignment and factory stability.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eNOTE: This bracket REQUIRES an installation kit for assembly (Part 21-1, 21-2, OR 21-3, see Fitment Guide below for the correct installation kit for your application).\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eHolley's kits supply the required brackets and hardware needed for installation, but allow you to choose the source for supplemental accessories and components that are often already on the donor engine or host vehicle. Whether sourcing from the salvage yard, the local auto parts store, your GM parts dealer, or Holley, you pick the accessories that match your needs and budget!\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eA Fitment And Required Components Guide helps you locate and source components and provides other notes and helpful hints. Three easy steps will get you going. Step one is to determine your belt alignment based on your crank pulley position on the engine you have. Step two is to choose the Holley accessory drive brackets that you need (A\/C, Alt \u0026amp; P\/S or both). Step three is to see which Holley installation kit your set-up requires to line up your accessories with your crank pulley position.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eAn application specific installation kit (part # 21-1, 21-2, or 21-3) is REQUIRED for most applications.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eReplacement hardware kit is 97-171.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eBlack Alt, P\/S \u0026amp; A\/C- Fits Sanden SD508 or SD7 Comp\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eThe most cost effective LS bracket solution on the market!\u003c\/li\u003e\n      \u003cli\u003eUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n      \u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n      \u003cli\u003eUtilizes commonly available and affordable GM alternators, power steering pumps and A\/C compressors\u003c\/li\u003e\n      \u003cli\u003eA\/C brackets position the compressor high above the cross-member but below the hood line for easy installation and great looks\u003c\/li\u003e\n      \u003cli\u003eA\/C brackets are also a bolt on solution to relocate A\/C compressor on engines using a GM Corvette accessory drive system\u003c\/li\u003e\n      \u003cli\u003eA\/C bracket accepts GM R4 compressor (Sanden version now available)\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559899173158,"sku":"20-132bk","price":411.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-132_cover_d1fc48c8-a306-454b-9735-459b54405d57.jpg?v=1777050645"},{"product_id":"20-132p","title":"LS\/LT High-Mount Accessory Drive Bracket\n- Passenger's \u0026 Driver's Side Brackets Polished","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eHolley is pleased to offer simple, clean, cost effective solutions that solve the accessory drive challenges encountered when swapping a GM LS engine into a muscle car, truck, hot rod or other vehicle. These brackets were designed to deliver a factory style appearance, correct belt alignment and factory stability.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eNOTE: This bracket REQUIRES an installation kit for assembly (Part 21-1, 21-2, OR 21-3, see Fitment Guide below for the correct installation kit for your application).\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eHolley's kits supply the required brackets and hardware needed for installation, but allow you to choose the source for supplemental accessories and components that are often already on the donor engine or host vehicle. Whether sourcing from the salvage yard, the local auto parts store, your GM parts dealer, or Holley, you pick the accessories that match your needs and budget!\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eA Fitment And Required Components Guide helps you locate and source components and provides other notes and helpful hints. Three easy steps will get you going. Step one is to determine your belt alignment based on your crank pulley position on the engine you have. Step two is to choose the Holley accessory drive brackets that you need (A\/C, Alt \u0026amp; P\/S or both). Step three is to see which Holley installation kit your set-up requires to line up your accessories with your crank pulley position.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eAn application specific installation kit (part # 21-1, 21-2, or 21-3) is REQUIRED for most applications.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eReplacement hardware kit is 97-171.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003ePolished Alt, P\/S \u0026amp; A\/C- Fits Sanden SD508 or SD7 Comp\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eThe most cost effective LS bracket solution on the market!\u003c\/li\u003e\n      \u003cli\u003eUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n      \u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n      \u003cli\u003eUtilizes commonly available and affordable GM alternators, power steering pumps and A\/C compressors\u003c\/li\u003e\n      \u003cli\u003eA\/C brackets position the compressor high above the cross-member but below the hood line for easy installation and great looks\u003c\/li\u003e\n      \u003cli\u003eA\/C brackets are also a bolt on solution to relocate A\/C compressor on engines using a GM Corvette accessory drive system\u003c\/li\u003e\n      \u003cli\u003eA\/C bracket accepts GM R4 compressor (Sanden version now available)\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559899271462,"sku":"20-132p","price":528.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-132_cover.jpg?v=1777050683"},{"product_id":"20-133","title":"LS High-Mount A\/C Accessory Drive Bracket - Passenger's Side A\/C Bracket\n- works with R4 compressor","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    LS A\/C Accessory Drive Bracket\u003cul\u003e\n\u003cli\u003e\tThe most cost effective LS bracket solution on the market!\u003c\/li\u003e\n\u003cli\u003e\tUniversal bracket, fits virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n\u003cli\u003e\tSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n\u003cli\u003e\tUtilizes commonly available and affordable GM A\/C compressors\u003c\/li\u003e\n\u003cli\u003e\tPositions the compressor high above the cross-member but below the hood line for easy installation and great looks\u003c\/li\u003e\n\u003cli\u003e\tBolt-on solution to relocate A\/C compressor on engines using a GM Corvette accessory drive system\u003c\/li\u003e\n\u003cli\u003e\tAccepts GM R4 compressor (Sanden version now available)\u003c\/li\u003e\n\u003cli\u003e\tFactory quality natural finish die casting for clean looks and durability. Can be polished, coated, painted or plated.\u003c\/li\u003e\n\u003cli\u003e\tFactory spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n\u003cli\u003e\tComplete accessory drive kits include all components and accessories are also available\u003c\/li\u003e\n\u003cli\u003e\tIdeal for crate engines, take out motors and engine builders!\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559899402534,"sku":"20-133","price":234.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/048a96818a3aa3afa6765d02590c47a506e27cc3_1bfce9ec-2e0c-40ee-882f-5fdad98fe96e.jpg?v=1757067575"},{"product_id":"20-133bk","title":"LS High-Mount A\/C Accessory Drive Bracket - Passenger's Side A\/C Bracket\n- works with R4 compressor","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eNOTE: This bracket REQUIRES an installation kit for assembly (Part 21-1, 21-2, OR 21-3, see Fitment Guide below for the correct installation kit for your application).\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eHolley is pleased to offer simple, clean, cost effective solutions that solve the accessory drive challenges encountered when swapping a GM LS engine into a muscle car, truck, hot rod or other vehicle. These brackets were designed to deliver a factory style appearance, correct belt alignment and factory stability.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eKey Features: •\tThe most cost effective LS bracket solution on the market!\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003e•\tUniversal bracket, fits virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products •\tSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets •\tUtilizes commonly available and affordable GM A\/C compressors •\tPositions the compressor high above the cross-member but below the hood line for easy installation and great looks •\tBolt-on solution to relocate A\/C compressor on engines using a GM Corvette accessory drive system •\tAccepts GM R4 compressor (Sanden version now available) •\tFactory spec flanged head hardware included to match your factory LS engine hardware •\tComplete accessory drive kits include all components and accessories are also available •\tIdeal for crate engines, take out motors and engine builders!\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eHolley's kits supply the required brackets and hardware needed for installation, but allow you to choose the source for supplemental accessories and components that are often already on the donor engine or host vehicle. Whether sourcing from the salvage yard, the local auto parts store, your GM parts dealer, or Holley, you pick the accessories that match your needs and budget!\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eA Fitment And Required Components Guide helps you locate and source components and provides other notes and helpful hints. Three easy steps will get you going. Step one is to determine your belt alignment based on your crank pulley position on the engine you have. Step two is to choose the Holley accessory drive brackets that you need (A\/C, Alt \u0026amp; P\/S or both). Step three is to see which Holley installation kit your set-up requires to line up your accessories with your crank pulley position. An application specific installation kit (part # 21-1, 21-2, or 21-3) is REQUIRED for most applications.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eBlack LS A\/C Accessory Drive Bracket\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eThe most cost effective LS bracket solution on the market!\u003c\/li\u003e\n      \u003cli\u003eUniversal bracket, fits virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n      \u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n      \u003cli\u003eUtilizes commonly available and affordable GM A\/C compressors\u003c\/li\u003e\n      \u003cli\u003ePositions the compressor high above the cross-member but below the hood line for easy installation and great looks\u003c\/li\u003e\n      \u003cli\u003eBolt-on solution to relocate A\/C compressor on engines using a GM Corvette accessory drive system\u003c\/li\u003e\n      \u003cli\u003eAccepts GM R4 compressor (Sanden version now available)\u003c\/li\u003e\n      \u003cli\u003eFactory quality natural finish die casting for clean looks and durability. Can be polished, coated, painted or plated.\u003c\/li\u003e\n      \u003cli\u003eFactory spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n      \u003cli\u003eComplete accessory drive kits include all components and accessories are also available\u003c\/li\u003e\n      \u003cli\u003eIdeal for crate engines, take out motors and engine builders!\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559899468070,"sku":"20-133bk","price":250.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-133cadlarge_ebaededc-22e3-4f70-a439-5344ccbd6cb9.jpg?v=1777050702"},{"product_id":"20-133p","title":"LS High-Mount A\/C Accessory Drive Bracket - Passenger's Side A\/C Bracket\n- works with R4 compressor","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eNOTE: This bracket REQUIRES an installation kit for assembly (Part 21-1, 21-2, OR 21-3, see Fitment Guide below for the correct installation kit for your application).\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eHolley is pleased to offer simple, clean, cost effective solutions that solve the accessory drive challenges encountered when swapping a GM LS engine into a muscle car, truck, hot rod or other vehicle. These brackets were designed to deliver a factory style appearance, correct belt alignment and factory stability.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eKey Features: •\tThe most cost effective LS bracket solution on the market!\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003e•\tUniversal bracket, fits virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products •\tSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets •\tUtilizes commonly available and affordable GM A\/C compressors •\tPositions the compressor high above the cross-member but below the hood line for easy installation and great looks •\tBolt-on solution to relocate A\/C compressor on engines using a GM Corvette accessory drive system •\tAccepts GM R4 compressor (Sanden version now available) •\tFactory spec flanged head hardware included to match your factory LS engine hardware •\tComplete accessory drive kits include all components and accessories are also available •\tIdeal for crate engines, take out motors and engine builders!\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eHolley's kits supply the required brackets and hardware needed for installation, but allow you to choose the source for supplemental accessories and components that are often already on the donor engine or host vehicle. Whether sourcing from the salvage yard, the local auto parts store, your GM parts dealer, or Holley, you pick the accessories that match your needs and budget!\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eA Fitment And Required Components Guide helps you locate and source components and provides other notes and helpful hints. Three easy steps will get you going. Step one is to determine your belt alignment based on your crank pulley position on the engine you have. Step two is to choose the Holley accessory drive brackets that you need (A\/C, Alt \u0026amp; P\/S or both). Step three is to see which Holley installation kit your set-up requires to line up your accessories with your crank pulley position. An application specific installation kit (part # 21-1, 21-2, or 21-3) is REQUIRED for most applications.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003ePolished LS A\/C Accessory Drive Bracket\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eThe most cost effective LS bracket solution on the market!\u003c\/li\u003e\n      \u003cli\u003eUniversal bracket, fits virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n      \u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n      \u003cli\u003eUtilizes commonly available and affordable GM A\/C compressors\u003c\/li\u003e\n      \u003cli\u003ePositions the compressor high above the cross-member but below the hood line for easy installation and great looks\u003c\/li\u003e\n      \u003cli\u003eBolt-on solution to relocate A\/C compressor on engines using a GM Corvette accessory drive system\u003c\/li\u003e\n      \u003cli\u003eAccepts GM R4 compressor (Sanden version now available)\u003c\/li\u003e\n      \u003cli\u003eFactory quality natural finish die casting for clean looks and durability. Can be polished, coated, painted or plated.\u003c\/li\u003e\n      \u003cli\u003eFactory spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n      \u003cli\u003eComplete accessory drive kits include all components and accessories are also available\u003c\/li\u003e\n      \u003cli\u003eIdeal for crate engines, take out motors and engine builders!\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559899566374,"sku":"20-133p","price":318.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-133cadlarge.jpg?v=1777050713"},{"product_id":"20-134","title":"LS High-Mount A\/C Accessory Drive Bracket - Fits Sanden SD508 or SD7 Comp.","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    Passenger's Side Bracket Only (A\/C) - Fits Sanden SD508 or SD7 Comp.\u003cul\u003e\n\u003cli\u003eThe most cost effective LS bracket solution on the market!\u003c\/li\u003e\n\u003cli\u003eUniversal bracket, fits virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n\u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n\u003cli\u003eUtilizes commonly available and affordable GM A\/C compressors\u003c\/li\u003e\n\u003cli\u003ePositions the compressor high above the cross-member but below the hood line for easy installation and great looks\u003c\/li\u003e\n\u003cli\u003eBolt-on solution to relocate A\/C compressor on engines using a GM Corvette accessory drive system\u003c\/li\u003e\n\u003cli\u003eAccepts GM R4 compressor (Sanden version now available)\u003c\/li\u003e\n\u003cli\u003eOEM quality natural finish die casting for clean looks and durability. Can be polished, coated, painted or plated\u003c\/li\u003e\n\u003cli\u003eOEM spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n\u003cli\u003eComplete accessory drive kits include all components and accessories are also available\u003c\/li\u003e\n\u003cli\u003eIdeal for crate engines, take out motors and engine builders!\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559899631910,"sku":"20-134","price":242.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/048a96818a3aa3afa6765d02590c47a506e27cc3_b9edad99-0a00-41c8-b8ed-c3ec2d0e51f6.jpg?v=1757067572"},{"product_id":"20-134bk","title":"LS High-Mount A\/C Accessory Drive Bracket - Fits Sanden SD508 or SD7 Comp.","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eHolley is pleased to offer simple, clean, cost effective solutions that solve the accessory drive challenges encountered when swapping a GM LS engine into a muscle car, truck, hot rod or other vehicle. These brackets were designed to deliver a factory style appearance, correct belt alignment and factory stability.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eNOTE: This bracket REQUIRES an installation kit for assembly (Part 21-1, 21-2, OR 21-3, see Fitment Guide below for the correct installation kit for your application).\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eHolley's kits supply the required brackets and hardware needed for installation, but allow you to choose the source for supplemental accessories and components that are often already on the donor engine or host vehicle. Whether sourcing from the salvage yard, the local auto parts store, your GM parts dealer, or Holley, you pick the accessories that match your needs and budget!\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eA Fitment And Required Components Guide helps you locate and source components and provides other notes and helpful hints. Three easy steps will get you going. Step one is to determine your belt alignment based on your crank pulley position on the engine you have. Step two is to choose the Holley accessory drive brackets that you need (A\/C, Alt \u0026amp; P\/S or both). Step three is to see which Holley installation kit your set-up requires to line up your accessories with your crank pulley position. An application specific installation kit (part # 21-1, 21-2, or 21-3) is REQUIRED for most applications.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eBlack Passenger's Side Bracket Only (A\/C) - Fits Sanden SD508 or SD7 Comp\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eThe most cost effective LS bracket solution on the market!\u003c\/li\u003e\n      \u003cli\u003eUniversal bracket, fits virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n      \u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n      \u003cli\u003eUtilizes commonly available and affordable GM A\/C compressors\u003c\/li\u003e\n      \u003cli\u003ePositions the compressor high above the cross-member but below the hood line for easy installation and great looks\u003c\/li\u003e\n      \u003cli\u003eBolt-on solution to relocate A\/C compressor on engines using a GM Corvette accessory drive system\u003c\/li\u003e\n      \u003cli\u003eAccepts GM R4 compressor (Sanden version now available)\u003c\/li\u003e\n      \u003cli\u003eOEM spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n      \u003cli\u003eComplete accessory drive kits include all components and accessories are also available\u003c\/li\u003e\n      \u003cli\u003eIdeal for crate engines, take out motors and engine builders!\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559899730214,"sku":"20-134bk","price":249.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-134_cover_720d7be9-fcd4-44fc-975a-69ca083b7bd6.jpg?v=1777050728"},{"product_id":"20-134p","title":"LS High-Mount A\/C Accessory Drive Bracket - Fits Sanden SD508 or SD7 Comp.","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eHolley is pleased to offer simple, clean, cost effective solutions that solve the accessory drive challenges encountered when swapping a GM LS engine into a muscle car, truck, hot rod or other vehicle. These brackets were designed to deliver a factory style appearance, correct belt alignment and factory stability.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eNOTE: This bracket REQUIRES an installation kit for assembly (Part 21-1, 21-2, OR 21-3, see Fitment Guide below for the correct installation kit for your application).\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eHolley's kits supply the required brackets and hardware needed for installation, but allow you to choose the source for supplemental accessories and components that are often already on the donor engine or host vehicle. Whether sourcing from the salvage yard, the local auto parts store, your GM parts dealer, or Holley, you pick the accessories that match your needs and budget!\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eA Fitment And Required Components Guide helps you locate and source components and provides other notes and helpful hints. Three easy steps will get you going. Step one is to determine your belt alignment based on your crank pulley position on the engine you have. Step two is to choose the Holley accessory drive brackets that you need (A\/C, Alt \u0026amp; P\/S or both). Step three is to see which Holley installation kit your set-up requires to line up your accessories with your crank pulley position. An application specific installation kit (part # 21-1, 21-2, or 21-3) is REQUIRED for most applications.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003ePolished Passenger's Side Bracket Only (A\/C) - Fits Sanden SD508 or SD7 Comp\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eThe most cost effective LS bracket solution on the market!\u003c\/li\u003e\n      \u003cli\u003eUniversal bracket, fits virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n      \u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n      \u003cli\u003eUtilizes commonly available and affordable GM A\/C compressors\u003c\/li\u003e\n      \u003cli\u003ePositions the compressor high above the cross-member but below the hood line for easy installation and great looks\u003c\/li\u003e\n      \u003cli\u003eBolt-on solution to relocate A\/C compressor on engines using a GM Corvette accessory drive system\u003c\/li\u003e\n      \u003cli\u003eAccepts GM R4 compressor (Sanden version now available)\u003c\/li\u003e\n      \u003cli\u003eOEM spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n      \u003cli\u003eComplete accessory drive kits include all components and accessories are also available\u003c\/li\u003e\n      \u003cli\u003eIdeal for crate engines, take out motors and engine builders!\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559900385574,"sku":"20-134p","price":320.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-134_cover.jpg?v=1777050737"},{"product_id":"20-135","title":"LS\/LT High-Mount Accessory Drive Bracket - Driver's Side P\/S \u0026 Alt Bracket","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    For applications without A\/C or using factory A\/C bracket\u003cul\u003e\n\u003cli\u003e\tThe most cost effective LS bracket solution on the market!\u003c\/li\u003e\n\u003cli\u003e\tUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n\u003cli\u003e\tSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n\u003cli\u003e\tUtilizes commonly available and affordable GM alternators and power steering pumps\u003c\/li\u003e\n\u003cli\u003e\tFactory quality natural finish die castings for clean looks and durability. Can be polished, coated, painted or plated.\u003c\/li\u003e\n\u003cli\u003e\tFactory spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n\u003cli\u003e       Complete accessory drive kits include all components and accessories are also available\u003c\/li\u003e\n\u003cli\u003e\tIdeal for crate engines, take out motors and engine builders!\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559900451110,"sku":"20-135","price":256.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/048a96818a3aa3afa6765d02590c47a506e27cc3_ac019dbb-4cc8-4068-a1cc-fa5cf14568b3.jpg?v=1757067570"},{"product_id":"20-135bk","title":"LS\/LT High-Mount Accessory Drive Bracket - Driver's Side P\/S \u0026 Alt Bracket","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eNOTE: This bracket MAY REQUIRE an installation kit for assembly (Part 21-2 OR 21-3, see Fitment Guide below for details).\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eHolley is pleased to offer simple, clean, cost effective solutions that solve the accessory drive challenges encountered when swapping a GM LS engine into a muscle car, truck, hot rod or other vehicle. These brackets were designed to deliver a factory style appearance, correct belt alignment and factory stability.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eKey Features: •\tThe most cost effective LS bracket solution on the market!\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003e•\tUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products •\tSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets •\tUtilizes commonly available and affordable GM alternators and power steering pumps •\tFactory spec flanged head hardware included to match your factory LS engine hardware • Complete accessory drive kits include all components and accessories are also available •\tIdeal for crate engines, take out motors and engine builders!\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eHolley's kits supply the required brackets and hardware needed for installation, but allow you to choose the source for supplemental accessories and components that are often already on the donor engine or host vehicle. Whether sourcing from the salvage yard, the local auto parts store, your GM parts dealer, or Holley, you pick the accessories that match your needs and budget!\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eA Fitment And Required Components Guide helps you locate and source components and provides other notes and helpful hints. Three easy steps will get you going. Step one is to determine your belt alignment based on your crank pulley position on the engine you have. Step two is to choose the Holley accessory drive brackets that you need (A\/C, Alt \u0026amp; P\/S or both). Step three is to see which Holley installation kit your set-up requires to line up your accessories with your crank pulley position. An application specific installation kit (part # 21-1, 21-2, or 21-3) is REQUIRED for most applications.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eFor applications without A\/C or using factory A\/C bracket\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eThe most cost effective LS bracket solution on the market!\u003c\/li\u003e\n      \u003cli\u003eUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n      \u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n      \u003cli\u003eUtilizes commonly available and affordable GM alternators and power steering pumps\u003c\/li\u003e\n      \u003cli\u003eFactory quality natural finish die castings for clean looks and durability. Can be polished, coated, painted or plated.\u003c\/li\u003e\n      \u003cli\u003eFactory spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n      \u003cli\u003eComplete accessory drive kits include all components and accessories are also available\u003c\/li\u003e\n      \u003cli\u003eIdeal for crate engines, take out motors and engine builders!\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559900778790,"sku":"20-135bk","price":256.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-135cadlarge_a7b32dce-65dc-4a89-970a-4b54df4ab4a5.jpg?v=1777050751"},{"product_id":"20-136","title":"LS\/LT High-Mount Complete Accessory Drive Kit","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    Includes R4 A\/C Compressor, Alternator, Power Steering Pump, Belt \u0026amp; Pulleys\u003cul\u003e\n\u003cli\u003eThe most cost effective LS\/LT bracket solution on the market!\u003c\/li\u003e\n\u003cli\u003eUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n\u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n\u003cli\u003eOEM spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n\u003cli\u003eOEM quality natural finish die castings for clean looks and durability. Can be polished, coated, painted or plated.\u003c\/li\u003e\n\u003cli\u003eAccessories, tensioner, and pulleys are manufactured by OEM suppliers many of which are on production vehicles today.\u003c\/li\u003e\n\u003cli\u003eIdeal for crate engines, take out motors and engine builders\u003c\/li\u003e\n\u003cli\u003eINCLUDES THE FOLLOWING ITEMS\u003c\/li\u003e\n\u003cli\u003e70R154 - BELT, 6V SERPENTINE\u003c\/li\u003e\n\u003cli\u003e97-153 - IDLER PULLEY, GROOVED, 59mm DIAMETER\u003c\/li\u003e\n\u003cli\u003e20-131 - LS ACC DRV BRACKET KIT\u003c\/li\u003e\n\u003cli\u003e97-152 - PULLEY, P\/S PUMP, LS\u003c\/li\u003e\n\u003cli\u003e97-151 - TENSIONER ASSEMBLY, LS\u003c\/li\u003e\n\u003cli\u003e97-150 - IDLER PULLEY, SMOOTH, 2.75\" DIAMETER\u003c\/li\u003e\n\u003cli\u003e199-200 - HARNESS PIGTAIL, 8mm PIN, R4 COMPRESSOR\u003c\/li\u003e\n\u003cli\u003e197-400 - HARNESS PIGTAIL, ALTERNATOR, AD STYLE\u003c\/li\u003e\n\u003cli\u003e199-100 - AC R4 COMPRESSOR, 8mm PIN, R-134a\u003c\/li\u003e\n\u003cli\u003e198-100 - P\/S PUMP, CORVETTE ALUMINUM\u003c\/li\u003e\n\u003cli\u003e197-301 - ALTERNATOR, 130 AMP, LARGE CASE\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559900877094,"sku":"20-136","price":2015.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/6ccf99395f03ca2af9fa390746f746eea0655e06_52ead984-04fc-43fe-b263-d56e5c79bdc6.jpg?v=1757067568"},{"product_id":"20-136bk","title":"LS\/LT High-Mount Complete Accessory Drive Kit- Black Finish","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eNow available from Holley are complete kits that have everything needed for the application including the belt. Included are accessories, pulleys, tensioner, and belt that are manufactured by OE part suppliers many of which are on production cars today.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eIncludes R4 A\/C Compressor, Alternator, Power Steering Pump, Belt \u0026amp; Pulleys\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eThe most cost effective LS\/LT bracket solution on the market!\u003c\/li\u003e\n      \u003cli\u003eUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n      \u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n      \u003cli\u003eOEM spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n      \u003cli\u003eOEM quality natural finish die castings for clean looks and durability. Can be polished, coated, painted or plated.\u003c\/li\u003e\n      \u003cli\u003eAccessories, tensioner, and pulleys are manufactured by OEM suppliers many of which are on production vehicles today.\u003c\/li\u003e\n      \u003cli\u003eIdeal for crate engines, take out motors and engine builders\u003c\/li\u003e\n      \u003cli\u003eINCLUDES THE FOLLOWING ITEMS\u003c\/li\u003e\n      \u003cli\u003e70R154 - BELT, 6V SERPENTINE\u003c\/li\u003e\n      \u003cli\u003e97-153 - IDLER PULLEY, GROOVED, 59mm DIAMETER\u003c\/li\u003e\n      \u003cli\u003e20-131 - LS ACC DRV BRACKET KIT\u003c\/li\u003e\n      \u003cli\u003e97-152 - PULLEY, P\/S PUMP, LS\u003c\/li\u003e\n      \u003cli\u003e97-151 - TENSIONER ASSEMBLY, LS\u003c\/li\u003e\n      \u003cli\u003e97-150 - IDLER PULLEY, SMOOTH, 2.75\" DIAMETER\u003c\/li\u003e\n      \u003cli\u003e199-200 - HARNESS PIGTAIL, 8mm PIN, R4 COMPRESSOR\u003c\/li\u003e\n      \u003cli\u003e197-400 - HARNESS PIGTAIL, ALTERNATOR, AD STYLE\u003c\/li\u003e\n      \u003cli\u003e199-100 - AC R4 COMPRESSOR, 8mm PIN, R-134a\u003c\/li\u003e\n      \u003cli\u003e198-100 - P\/S PUMP, CORVETTE ALUMINUM\u003c\/li\u003e\n      \u003cli\u003e197-301 - ALTERNATOR, 130 AMP, LARGE CASE\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559901106470,"sku":"20-136bk","price":2207.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-136_cover_06ca278d-7a12-4197-b438-3a38dccf7b9e.jpg?v=1777050824"},{"product_id":"20-137","title":"LS\/LT High-Mount Complete Accessory Drive Kit","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    Includes SD508 A\/C Compressor, Alternator, P\/S Pump, Tensioner, Belt, \u0026amp; Pulleys\u003cul\u003e\n\u003cli\u003eINCLUDES THE FOLLOWING ITEMS\u003c\/li\u003e\n\u003cli\u003eIdeal for crate engines, take out motors and engine builders\u003c\/li\u003e\n\u003cli\u003eOEM spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n\u003cli\u003eOEM quality natural finish die castings for clean looks and durability. Can be polished, coated, painted or plated.\u003c\/li\u003e\n\u003cli\u003eAccessories, tensioner, and pulleys are manufactured by OEM suppliers many of which are on production vehicles today.\u003c\/li\u003e\n\u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n\u003cli\u003eUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n\u003cli\u003eThe most cost effective LS\/LT bracket solution on the market!\u003c\/li\u003e\n\u003cli\u003eKIT Contains:\u003c\/li\u003e\n\u003cli\u003e197-301 - ALTERNATOR, 130 AMP, LARGE CASE\u003c\/li\u003e\n\u003cli\u003e198-100 - P\/S PUMP, CORVETTE ALUMINUM\u003c\/li\u003e\n\u003cli\u003e199-101 - AC SD508 SANDEN COMPRESSOR, R-134a\u003c\/li\u003e\n\u003cli\u003e70R155 - BELT, 6V SERPENTINE\u003c\/li\u003e\n\u003cli\u003e20-132 - LS A\/C DRV BRACKET KIT (WORKS W\/SANDEN AC COMP)\u003c\/li\u003e\n\u003cli\u003e97-152 - PULLEY, P\/S PUMP\u003c\/li\u003e\n\u003cli\u003e97-151 - TENSIONER ASSEMBLY\u003c\/li\u003e\n\u003cli\u003e197-400 - HARNESS PIGTAIL, ALTERNATOR, AD STYLE\u003c\/li\u003e\n\u003cli\u003e97-150 - IDLER PULLEY, SMOOTH, 2.75\" DIAMETER\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559901270310,"sku":"20-137","price":1873.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/30520277c7355466cd7a6bb68c043209171e6c8e_81eb8ec6-363e-4ca5-a5c6-502faa98b156.jpg?v=1757067566"},{"product_id":"20-137bk","title":"LS\/LT High-Mount Complete Accessory Drive Kit- Black Finish","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eNow available from Holley are complete kits in black that have everything needed for the application including the belt. Included are accessories, pulleys, tensioner, and belt that are manufactured by OE part suppliers many of which are on production cars today.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eReplacement hardware kit is 97-171\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eIncludes SD508 A\/C Compressor, Alternator, P\/S Pump, Tensioner, Belt, \u0026amp; Pulleys\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003e197-301 - ALTERNATOR, 130 AMP, LARGE CASE\u003c\/li\u003e\n      \u003cli\u003eINCLUDES THE FOLLOWING ITEMS\u003c\/li\u003e\n      \u003cli\u003eIdeal for crate engines, take out motors and engine builders\u003c\/li\u003e\n      \u003cli\u003eOEM spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n      \u003cli\u003eOEM quality natural finish die castings for clean looks and durability. Can be polished, coated, painted or plated.\u003c\/li\u003e\n      \u003cli\u003eAccessories, tensioner, and pulleys are manufactured by OEM suppliers many of which are on production vehicles today.\u003c\/li\u003e\n      \u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n      \u003cli\u003eUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n      \u003cli\u003eThe most cost effective LS\/LT bracket solution on the market!\u003c\/li\u003e\n      \u003cli\u003eKIT Contains:\u003c\/li\u003e\n      \u003cli\u003e198-100 - P\/S PUMP, CORVETTE ALUMINUM\u003c\/li\u003e\n      \u003cli\u003e199-101 - AC SD508 SANDEN COMPRESSOR, R-134a\u003c\/li\u003e\n      \u003cli\u003e70R155 - BELT, 6V SERPENTINE\u003c\/li\u003e\n      \u003cli\u003e20-132 - LS A\/C DRV BRACKET KIT (WORKS W\/SANDEN AC COMP)\u003c\/li\u003e\n      \u003cli\u003e97-152 - PULLEY, P\/S PUMP\u003c\/li\u003e\n      \u003cli\u003e97-151 - TENSIONER ASSEMBLY\u003c\/li\u003e\n      \u003cli\u003e197-400 - HARNESS PIGTAIL, ALTERNATOR, AD STYLE\u003c\/li\u003e\n      \u003cli\u003e97-150 - IDLER PULLEY, SMOOTH, 2.75\" DIAMETER\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559901466918,"sku":"20-137bk","price":2159.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-137_cover_25af4d08-a1e3-488e-b703-bc8fb123929c.jpg?v=1777050893"},{"product_id":"20-137p","title":"LS\/LT High-Mount Complete Accessory Drive Kit- Polished Finish","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eNow available from Holley are complete kits in polished finish that have everything needed for the application including the belt. Included are accessories, pulleys, tensioner, and belt that are manufactured by OE part suppliers many of which are on production cars today.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eReplacement hardware kit is 97-171\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eIncludes SD508 A\/C Compressor, Alternator, P\/S Pump, Tensioner, Belt, \u0026amp; Pulleys\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003e197-301 - ALTERNATOR, 130 AMP, LARGE CASE\u003c\/li\u003e\n      \u003cli\u003eINCLUDES THE FOLLOWING ITEMS\u003c\/li\u003e\n      \u003cli\u003eIdeal for crate engines, take out motors and engine builders\u003c\/li\u003e\n      \u003cli\u003eOEM spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n      \u003cli\u003eOEM quality natural finish die castings for clean looks and durability. Can be polished, coated, painted or plated.\u003c\/li\u003e\n      \u003cli\u003eAccessories, tensioner, and pulleys are manufactured by OEM suppliers many of which are on production vehicles today.\u003c\/li\u003e\n      \u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n      \u003cli\u003eUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n      \u003cli\u003eThe most cost effective LS\/LT bracket solution on the market!\u003c\/li\u003e\n      \u003cli\u003eKIT Contains:\u003c\/li\u003e\n      \u003cli\u003e198-100 - P\/S PUMP, CORVETTE ALUMINUM\u003c\/li\u003e\n      \u003cli\u003e199-101 - AC SD508 SANDEN COMPRESSOR, R-134a\u003c\/li\u003e\n      \u003cli\u003e70R155 - BELT, 6V SERPENTINE\u003c\/li\u003e\n      \u003cli\u003e20-132 - LS A\/C DRV BRACKET KIT (WORKS W\/SANDEN AC COMP)\u003c\/li\u003e\n      \u003cli\u003e97-152 - PULLEY, P\/S PUMP\u003c\/li\u003e\n      \u003cli\u003e97-151 - TENSIONER ASSEMBLY\u003c\/li\u003e\n      \u003cli\u003e197-400 - HARNESS PIGTAIL, ALTERNATOR, AD STYLE\u003c\/li\u003e\n      \u003cli\u003e97-150 - IDLER PULLEY, SMOOTH, 2.75\" DIAMETER\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559901630758,"sku":"20-137p","price":2639.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-137_cover.jpg?v=1777050954"},{"product_id":"20-138","title":"LS\/LT High-Mount Complete Accessory Drive Kit","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    Includes SD7 A\/C Compressor, Alternator, P\/S Pump, Tensioner, Belt, \u0026amp; Pulleys\u003cul\u003e\n\u003cli\u003e70R156 - BELT, 6V SERPENTINE\u003c\/li\u003e\n\u003cli\u003eUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n\u003cli\u003eThe most cost effective LS\/LT bracket solution on the market!\u003c\/li\u003e\n\u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n\u003cli\u003eAccessories, tensioner, and pulleys are manufactured by OEM suppliers many of which are on production vehicles today.\u003c\/li\u003e\n\u003cli\u003eKIT Contains\u003c\/li\u003e\n\u003cli\u003e97-152 - PULLEY, P\/S PUMP\u003c\/li\u003e\n\u003cli\u003e20-132 - LS A\/C DRV BRACKET KIT\u003c\/li\u003e\n\u003cli\u003e97-151 - TENSIONER ASSM W\/GROOVED PULLEY\u003c\/li\u003e\n\u003cli\u003e97-150 - IDLER PULLEY, SMOOTH, 2.75\" DIAMETER\u003c\/li\u003e\n\u003cli\u003e197-400 - HARNESS PIGTAIL, ALTERNATOR, AD STYLE\u003c\/li\u003e\n\u003cli\u003e199-102 - AC SD7 SANDEN COMPRESSOR, R-134a\u003c\/li\u003e\n\u003cli\u003e198-100 - P\/S PUMP, CORVETTE ALUMINUM\u003c\/li\u003e\n\u003cli\u003e197-301 - ALTERNATOR, 130 AMP, LARGE CASE\u003c\/li\u003e\n\u003cli\u003eIdeal for crate engines, take out motors and engine builders\u003c\/li\u003e\n\u003cli\u003eOEM quality natural finish die castings for clean looks and durability. Can be polished, coated, painted or plated.\u003c\/li\u003e\n\u003cli\u003eOEM spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559901794598,"sku":"20-138","price":1873.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/352834a6123900ff2f781e4c52a6c53629531cfc_b173f928-a926-4a0d-9c35-eb6e12db2f40.jpg?v=1757067562"},{"product_id":"20-138bk","title":"LS\/LT High-Mount Complete Accessory Drive Kit- Black Finish","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eNow available from Holley are complete kits in black that have everything needed for the application including the belt. Included are accessories, pulleys, tensioner, and belt that are manufactured by OE part suppliers many of which are on production cars today.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eReplacement hardware kit is 97-171\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eIncludes SD7 A\/C Compressor, Alternator, P\/S Pump, Tensioner, Belt, \u0026amp; Pulleys\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003e70R156 - BELT, 6V SERPENTINE\u003c\/li\u003e\n      \u003cli\u003eUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n      \u003cli\u003eThe most cost effective LS\/LT bracket solution on the market!\u003c\/li\u003e\n      \u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n      \u003cli\u003eAccessories, tensioner, and pulleys are manufactured by OEM suppliers many of which are on production vehicles today.\u003c\/li\u003e\n      \u003cli\u003eKIT Contains\u003c\/li\u003e\n      \u003cli\u003e97-152 - PULLEY, P\/S PUMP\u003c\/li\u003e\n      \u003cli\u003e20-132 - LS A\/C DRV BRACKET KIT\u003c\/li\u003e\n      \u003cli\u003e97-151 - TENSIONER ASSM W\/GROOVED PULLEY\u003c\/li\u003e\n      \u003cli\u003e97-150 - IDLER PULLEY, SMOOTH, 2.75\" DIAMETER\u003c\/li\u003e\n      \u003cli\u003e197-400 - HARNESS PIGTAIL, ALTERNATOR, AD STYLE\u003c\/li\u003e\n      \u003cli\u003e199-102 - AC SD7 SANDEN COMPRESSOR, R-134a\u003c\/li\u003e\n      \u003cli\u003e198-100 - P\/S PUMP, CORVETTE ALUMINUM\u003c\/li\u003e\n      \u003cli\u003e197-301 - ALTERNATOR, 130 AMP, LARGE CASE\u003c\/li\u003e\n      \u003cli\u003eIdeal for crate engines, take out motors and engine builders\u003c\/li\u003e\n      \u003cli\u003eOEM spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n      \u003cli\u003eOEM quality natural finish die castings for clean looks and durability. Can be polished, coated, painted or plated.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559902253350,"sku":"20-138bk","price":2159.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-137_cover_b81cea6c-df27-415d-99a9-e303ccac8b04.jpg?v=1777051044"},{"product_id":"20-140","title":"LS High-Mount A\/C Accessory Drive Kit\n- Includes R4 A\/C Compressor, Tensioner, \u0026 Pulleys","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    Passenger's Side A\/C Bracket - Includes R4 A\/C Compressor, Tensioner, \u0026amp; Pulleys\u003cul\u003e\n\u003cli\u003eThe most cost effective LS bracket solution on the market!\u003c\/li\u003e\n\u003cli\u003eUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n\u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n\u003cli\u003eAccessories, tensioner, and pulleys are manufactured by OEM suppliers many of which are on production vehicles today.\u003c\/li\u003e\n\u003cli\u003eOEM quality natural finish die castings for clean looks and durability. Can be polished, coated, painted or plated.\u003c\/li\u003e\n\u003cli\u003eOEM spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n\u003cli\u003eIdeal for crate engines, take out motors and engine builders\u003c\/li\u003e\n\u003cli\u003eINCLUDES THE FOLLOWING ITEMS\u003c\/li\u003e\n\u003cli\u003e199-100 - AC R4 COMPRESSOR, 8mm PIN, R-134a\u003c\/li\u003e\n\u003cli\u003e199-200 - HARNESS PIGTAIL, 8mm PIN, R4 COMPRESSOR\u003c\/li\u003e\n\u003cli\u003e97-150 - IDLER PULLEY, SMOOTH, 2.75\" DIAMETER\u003c\/li\u003e\n\u003cli\u003e97-151 - TENSIONER ASSEMBLEY, LS\u003c\/li\u003e\n\u003cli\u003e97-153 - IDLER PULLEY, GROOVED, 59mm DIAMETER\u003c\/li\u003e\n\u003cli\u003e20-133 - LS A\/C BRACKET KIT PASSENGER SIDE\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559902613798,"sku":"20-140","price":854.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/048a96818a3aa3afa6765d02590c47a506e27cc3_8b8656a2-cbe3-439f-8378-ec316a2f99a7.jpg?v=1757067560"},{"product_id":"20-140bk","title":"LS High-Mount A\/C Accessory Drive Kit\n- Includes R4 A\/C Compressor, Tensioner, \u0026 Pulleys- Black Finish","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eNow available from Holley are complete A\/C kits that have everything needed for the application. Already have the P\/S pump and alternator system from the donor truck or car engine? These complete A\/C brackets kits move the compressor up high and away from the frame rail (no more notching!). Included are compressor, pulleys, and tensioner that are manufactured by OE part suppliers many of which are on production cars today.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003ePassenger's Side A\/C Bracket - Includes R4 A\/C Compressor, Tensioner, \u0026amp; Pulleys\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eThe most cost effective LS bracket solution on the market!\u003c\/li\u003e\n      \u003cli\u003eUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n      \u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n      \u003cli\u003eAccessories, tensioner, and pulleys are manufactured by OEM suppliers many of which are on production vehicles today.\u003c\/li\u003e\n      \u003cli\u003eOEM quality natural finish die castings for clean looks and durability. Can be polished, coated, painted or plated.\u003c\/li\u003e\n      \u003cli\u003eOEM spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n      \u003cli\u003eIdeal for crate engines, take out motors and engine builders\u003c\/li\u003e\n      \u003cli\u003eINCLUDES THE FOLLOWING ITEMS\u003c\/li\u003e\n      \u003cli\u003e199-100 - AC R4 COMPRESSOR, 8mm PIN, R-134a\u003c\/li\u003e\n      \u003cli\u003e199-200 - HARNESS PIGTAIL, 8mm PIN, R4 COMPRESSOR\u003c\/li\u003e\n      \u003cli\u003e97-150 - IDLER PULLEY, SMOOTH, 2.75\" DIAMETER\u003c\/li\u003e\n      \u003cli\u003e97-151 - TENSIONER ASSEMBLEY, LS\u003c\/li\u003e\n      \u003cli\u003e97-153 - IDLER PULLEY, GROOVED, 59mm DIAMETER\u003c\/li\u003e\n      \u003cli\u003e20-133 - LS A\/C BRACKET KIT PASSENGER SIDE\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559902744870,"sku":"20-140bk","price":899.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-140_cover_dba8daf9-7509-4445-8e1d-1f8f07151358.jpg?v=1777051080"},{"product_id":"20-140p","title":"LS High-Mount A\/C Accessory Drive Kit\n- Includes R4 A\/C Compressor, Tensioner, \u0026 Pulleys-Polished","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eNow available from Holley are complete A\/C kits that have everything needed for the application. Already have the P\/S pump and alternator system from the donor truck or car engine? These complete A\/C brackets kits move the compressor up high and away from the frame rail (no more notching!). Included are compressor, pulleys, and tensioner that are manufactured by OE part suppliers many of which are on production cars today.- Polished finish\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003ePassenger's Side A\/C Bracket - Includes R4 A\/C Compressor, Tensioner, \u0026amp; Pulleys\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eThe most cost effective LS bracket solution on the market!\u003c\/li\u003e\n      \u003cli\u003eUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n      \u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n      \u003cli\u003eAccessories, tensioner, and pulleys are manufactured by OEM suppliers many of which are on production vehicles today.\u003c\/li\u003e\n      \u003cli\u003eOEM quality natural finish die castings for clean looks and durability. Can be polished, coated, painted or plated.\u003c\/li\u003e\n      \u003cli\u003eOEM spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n      \u003cli\u003eIdeal for crate engines, take out motors and engine builders\u003c\/li\u003e\n      \u003cli\u003eINCLUDES THE FOLLOWING ITEMS\u003c\/li\u003e\n      \u003cli\u003e199-100 - AC R4 COMPRESSOR, 8mm PIN, R-134a\u003c\/li\u003e\n      \u003cli\u003e199-200 - HARNESS PIGTAIL, 8mm PIN, R4 COMPRESSOR\u003c\/li\u003e\n      \u003cli\u003e97-150 - IDLER PULLEY, SMOOTH, 2.75\" DIAMETER\u003c\/li\u003e\n      \u003cli\u003e97-151 - TENSIONER ASSEMBLEY, LS\u003c\/li\u003e\n      \u003cli\u003e97-153 - IDLER PULLEY, GROOVED, 59mm DIAMETER\u003c\/li\u003e\n      \u003cli\u003e20-133 - LS A\/C BRACKET KIT PASSENGER SIDE\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559902843174,"sku":"20-140p","price":923.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-140_cover.jpg?v=1777051126"},{"product_id":"20-141","title":"LS High-Mount A\/C Accessory Drive Kit\n- Includes SD508 A\/C Compressor, Tensioner, \u0026 Pulleys","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    Passenger's Side A\/C Bracket - Includes SD508 A\/C Compressor, Tensioner, \u0026amp; Pulleys\u003cul\u003e\n\u003cli\u003eThe most cost effective LS bracket solution on the market!\u003c\/li\u003e\n\u003cli\u003eUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n\u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n\u003cli\u003eAccessories, tensioner, and pulleys are manufactured by OEM suppliers many of which are on production vehicles today.\u003c\/li\u003e\n\u003cli\u003eOEM quality natural finish die castings for clean looks and durability. Can be polished, coated, painted or plated.\u003c\/li\u003e\n\u003cli\u003eOEM spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n\u003cli\u003eIdeal for crate engines, take out motors and engine builders\u003c\/li\u003e\n\u003cli\u003eINCLUDES THE FOLLOWING ITEMS\u003c\/li\u003e\n\u003cli\u003e20-134 - LS A\/C BRACKET KIT PASSENGER SIDE\u003c\/li\u003e\n\u003cli\u003e97-151 - TENSIONER ASSM W\/GROOVED PULLEY\u003c\/li\u003e\n\u003cli\u003e97-150 - IDLER PULLEY, SMOOTH, 2.75\" DIAMETER\u003c\/li\u003e\n\u003cli\u003e199-101 - AC SD508 SANDEN COMPRESSOR, R-134a\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559902908710,"sku":"20-141","price":809.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/048a96818a3aa3afa6765d02590c47a506e27cc3_d7c03185-6173-4962-8da3-6c32fdf32418.jpg?v=1757067557"},{"product_id":"20-141bk","title":"LS High-Mount A\/C Accessory Drive Kit\n- Includes SD508 A\/C Compressor, Tensioner, \u0026 Pulleys- Black Finish","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eNow available from Holley are complete A\/C kits with black finish that have everything needed for the application. Already have the P\/S pump and alternator system from the donor truck or car engine? These complete A\/C brackets kits move the compressor up high and away from the frame rail (no more notching!). Included are compressor, pulleys, and tensioner that are manufactured by OE part suppliers many of which are on production cars today.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003ePassenger's Side A\/C Bracket - Includes SD508 A\/C Compressor, Tensioner, \u0026amp; Pulleys\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eThe most cost effective LS bracket solution on the market!\u003c\/li\u003e\n      \u003cli\u003eUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n      \u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n      \u003cli\u003eAccessories, tensioner, and pulleys are manufactured by OEM suppliers many of which are on production vehicles today.\u003c\/li\u003e\n      \u003cli\u003eOEM quality natural finish die castings for clean looks and durability. Can be polished, coated, painted or plated.\u003c\/li\u003e\n      \u003cli\u003eOEM spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n      \u003cli\u003eIdeal for crate engines, take out motors and engine builders\u003c\/li\u003e\n      \u003cli\u003eINCLUDES THE FOLLOWING ITEMS\u003c\/li\u003e\n      \u003cli\u003e20-134 - LS A\/C BRACKET KIT PASSENGER SIDE\u003c\/li\u003e\n      \u003cli\u003e97-151 - TENSIONER ASSM W\/GROOVED PULLEY\u003c\/li\u003e\n      \u003cli\u003e97-150 - IDLER PULLEY, SMOOTH, 2.75\" DIAMETER\u003c\/li\u003e\n      \u003cli\u003e199-101 - AC SD508 SANDEN COMPRESSOR, R-134a\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559904710950,"sku":"20-141bk","price":878.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-141_cover_194305f1-de4c-403c-80e6-77e2a65edcda.jpg?v=1777051161"},{"product_id":"20-142","title":"LS High-Mount A\/C Accessory Drive Kit\n- Includes SD7 A\/C Compressor, Tensioner, \u0026 Pulleys","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    Passenger's Side A\/C Bracket - Includes SD7 A\/C Compressor, Tensioner, \u0026amp; Pulleys\u003cul\u003e\n\u003cli\u003eThe most cost effective LS bracket solution on the market!\u003c\/li\u003e\n\u003cli\u003eUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n\u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n\u003cli\u003eAccessories, tensioner, and pulleys are manufactured by OEM suppliers many of which are on production vehicles today.\u003c\/li\u003e\n\u003cli\u003eOEM quality natural finish die castings for clean looks and durability. Can be polished, coated, painted or plated.\u003c\/li\u003e\n\u003cli\u003eOEM spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n\u003cli\u003eIdeal for crate engines, take out motors and engine builders\u003c\/li\u003e\n\u003cli\u003eINCLUDES THE FOLLOWING ITEMS\u003c\/li\u003e\n\u003cli\u003e20-134 - LS A\/C BRACKET KIT PASSENGER SIDE\u003c\/li\u003e\n\u003cli\u003e97-151 - TENSIONER ASSM W\/GROOVED PULLEY\u003c\/li\u003e\n\u003cli\u003e97-150 - IDLER PULLEY, SMOOTH, 2.75\" DIAMETER\u003c\/li\u003e\n\u003cli\u003e199-102 - AC SD7 SANDEN COMPRESSOR, R-134a\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559905595686,"sku":"20-142","price":854.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/048a96818a3aa3afa6765d02590c47a506e27cc3_175bdc60-e6f4-4e86-baab-37be9f6627c4.jpg?v=1757067547"},{"product_id":"20-142bk","title":"LS High-Mount A\/C Accessory Drive Kit\n- Includes SD7 A\/C Compressor, Tensioner, \u0026 Pulleys- Black Finish","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eNow available from Holley are complete A\/C kits finished in black that have everything needed for the application. Already have the P\/S pump and alternator system from the donor truck or car engine? These complete A\/C brackets kits move the compressor up high and away from the frame rail (no more notching!). Included are compressor, pulleys, and tensioner that are manufactured by OE part suppliers many of which are on production cars today.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003ePassenger's Side A\/C Bracket - Includes SD7 A\/C Compressor, Tensioner, \u0026amp; Pulleys\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eThe most cost effective LS bracket solution on the market!\u003c\/li\u003e\n      \u003cli\u003eUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n      \u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n      \u003cli\u003eAccessories, tensioner, and pulleys are manufactured by OEM suppliers many of which are on production vehicles today.\u003c\/li\u003e\n      \u003cli\u003eOEM quality natural finish die castings for clean looks and durability. Can be polished, coated, painted or plated.\u003c\/li\u003e\n      \u003cli\u003eOEM spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n      \u003cli\u003eIdeal for crate engines, take out motors and engine builders\u003c\/li\u003e\n      \u003cli\u003eINCLUDES THE FOLLOWING ITEMS\u003c\/li\u003e\n      \u003cli\u003e20-134 - LS A\/C BRACKET KIT PASSENGER SIDE\u003c\/li\u003e\n      \u003cli\u003e97-151 - TENSIONER ASSM W\/GROOVED PULLEY\u003c\/li\u003e\n      \u003cli\u003e97-150 - IDLER PULLEY, SMOOTH, 2.75\" DIAMETER\u003c\/li\u003e\n      \u003cli\u003e199-102 - AC SD7 SANDEN COMPRESSOR, R-134a\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559906316582,"sku":"20-142bk","price":854.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-142_cover_176c66f4-d9b4-472a-ad98-4b1930f5a55a.jpg?v=1777051204"},{"product_id":"20-142p","title":"LS High-Mount A\/C Accessory Drive Kit\n- Includes SD7 A\/C Compressor, Tensioner, \u0026 Pulleys- Polished Finish","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eNow available from Holley are complete A\/C kits that are polished that have everything needed for the application. Already have the P\/S pump and alternator system from the donor truck or car engine? These complete A\/C brackets kits move the compressor up high and away from the frame rail (no more notching!). Included are compressor, pulleys, and tensioner that are manufactured by OE part suppliers many of which are on production cars today.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003ePassenger's Side A\/C Bracket - Includes SD7 A\/C Compressor, Tensioner, \u0026amp; Pulleys\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eThe most cost effective LS bracket solution on the market!\u003c\/li\u003e\n      \u003cli\u003eUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n      \u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n      \u003cli\u003eAccessories, tensioner, and pulleys are manufactured by OEM suppliers many of which are on production vehicles today.\u003c\/li\u003e\n      \u003cli\u003eOEM quality natural finish die castings for clean looks and durability. Can be polished, coated, painted or plated.\u003c\/li\u003e\n      \u003cli\u003eOEM spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n      \u003cli\u003eIdeal for crate engines, take out motors and engine builders\u003c\/li\u003e\n      \u003cli\u003eINCLUDES THE FOLLOWING ITEMS\u003c\/li\u003e\n      \u003cli\u003e20-134 - LS A\/C BRACKET KIT PASSENGER SIDE\u003c\/li\u003e\n      \u003cli\u003e97-151 - TENSIONER ASSM W\/GROOVED PULLEY\u003c\/li\u003e\n      \u003cli\u003e97-150 - IDLER PULLEY, SMOOTH, 2.75\" DIAMETER\u003c\/li\u003e\n      \u003cli\u003e199-102 - AC SD7 SANDEN COMPRESSOR, R-134a\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559907365158,"sku":"20-142p","price":944.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-142_cover.jpg?v=1777051236"},{"product_id":"20-143","title":"LS\/LT High-Mount Alternator \u0026 Power Steering Pump Accessory Drive Kit\n- Driver's Side Bracket","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    Includes Alternator, Power Steering Pump \u0026amp; Pulleys\u003cul\u003e\n\u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n\u003cli\u003eAccessories, tensioner, and pulleys are manufactured by OEM suppliers many of which are on production vehicles today.\u003c\/li\u003e\n\u003cli\u003eOEM quality natural finish die castings for clean looks and durability. Can be polished, coated, painted or plated.\u003c\/li\u003e\n\u003cli\u003eUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n\u003cli\u003eThe most cost effective LS bracket solution on the market!\u003c\/li\u003e\n\u003cli\u003eOEM spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n\u003cli\u003eIdeal for crate engines, take out motors and engine builders\u003c\/li\u003e\n\u003cli\u003eINCLUDES THE FOLLOWING ITEMS\u003c\/li\u003e\n\u003cli\u003e197-301 - ALTERNATOR, 130 AMP, LARGE CASE\u003c\/li\u003e\n\u003cli\u003e198-100 - P\/S PUMP, CORVETTE ALUMINUM\u003c\/li\u003e\n\u003cli\u003e197-400 - HARNESS PIGTAIL, ALTERNATOR, AD STYLE\u003c\/li\u003e\n\u003cli\u003e97-150 - IDLER PULLEY, SMOOTH, 2.75\" DIAMETER\u003c\/li\u003e\n\u003cli\u003e97-152 - PULLEY, P\/S PUMP\u003c\/li\u003e\n\u003cli\u003e20-135 - LS ACC DRIVE BRACKET KIT DRIVER SIDE\u003c\/li\u003e\n\u003cli\u003e40R876 - SPACERS, FOR TRUCK TENSIONER\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559908839718,"sku":"20-143","price":1229.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/c65afaae4167fdbe9fb9190d62380ac626bae4c8_1196850b-a3f1-459f-8f0c-d652d2d322d5.jpg?v=1759494188"},{"product_id":"20-143bk","title":"LS\/LT High-Mount Alternator \u0026 Power Steering Pump Accessory Drive Kit\n- Driver's Side Bracket-Black Finish","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eNow available from Holley are complete kits- black finish that have everything needed for the application. If you don't want A\/C, or want to use the factory mounted LS A\/C, this is the complete drivers side P\/S, Alternator kit for you. Included are accessories and pulleys that are manufactured by OE part suppliers many of which are on production cars today.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eIncludes Alternator, Power Steering Pump \u0026amp; Pulleys\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eSimple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets\u003c\/li\u003e\n      \u003cli\u003eAccessories, tensioner, and pulleys are manufactured by OEM suppliers many of which are on production vehicles today.\u003c\/li\u003e\n      \u003cli\u003eOEM quality natural finish die castings for clean looks and durability. Can be polished, coated, painted or plated.\u003c\/li\u003e\n      \u003cli\u003eUniversal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products\u003c\/li\u003e\n      \u003cli\u003eThe most cost effective LS bracket solution on the market!\u003c\/li\u003e\n      \u003cli\u003eOEM spec flanged head hardware included to match your factory LS engine hardware\u003c\/li\u003e\n      \u003cli\u003eIdeal for crate engines, take out motors and engine builders\u003c\/li\u003e\n      \u003cli\u003eINCLUDES THE FOLLOWING ITEMS\u003c\/li\u003e\n      \u003cli\u003e197-301 - ALTERNATOR, 130 AMP, LARGE CASE\u003c\/li\u003e\n      \u003cli\u003e198-100 - P\/S PUMP, CORVETTE ALUMINUM\u003c\/li\u003e\n      \u003cli\u003e197-400 - HARNESS PIGTAIL, ALTERNATOR, AD STYLE\u003c\/li\u003e\n      \u003cli\u003e97-150 - IDLER PULLEY, SMOOTH, 2.75\" DIAMETER\u003c\/li\u003e\n      \u003cli\u003e97-152 - PULLEY, P\/S PUMP\u003c\/li\u003e\n      \u003cli\u003e20-135 - LS ACC DRIVE BRACKET KIT DRIVER SIDE\u003c\/li\u003e\n      \u003cli\u003e40R876 - SPACERS, FOR TRUCK TENSIONER\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559908905254,"sku":"20-143bk","price":1536.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-143_cover_2decdbe0-046d-47a7-86b8-7bb3b935ba07.jpg?v=1777051279"},{"product_id":"20-155bk","title":"Low-Mount LS Accessory Drive Bracket - Driver's Side P\/S \u0026 Alt Bracket Black","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003e\"Holley's new Low-Mount Accessory Drive Brackets and Complete Systems have the components tucked in tighter to the block and mounted lower for a more attractive and compact package. Ideal for LS engine swaps with limited space or where a low, more attractive appearance is desired.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eFor applications without A\/C or using factory A\/C bracket\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eSmall Compact Accessory Brackets \u0026amp; Complete Kits\u003c\/li\u003e\n      \u003cli\u003eModular System – Buy Brackets \u0026amp; Installation Kit or Complete Kits\u003c\/li\u003e\n      \u003cli\u003eFits Middle and Long Accessory Spacing\u003c\/li\u003e\n      \u003cli\u003eInstallation Kit 21-4 Required w\/ Long Spacing\u003c\/li\u003e\n      \u003cli\u003eP\/S Hardline Works w\/ Most Type II P\/S Pumps (Sold Separately)\u003c\/li\u003e\n      \u003cli\u003eCost Effective Solution\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559910281510,"sku":"20-155bk","price":291.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-155_assembly_image_798e40aa-605f-4f38-b9b2-4d1f9b605440.jpg?v=1777051314"},{"product_id":"20-155p","title":"Low-Mount LS Accessory Drive Bracket - Driver's Side P\/S \u0026 Alt Bracket Polished","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003e\"Holley's new Low Mount Accessory Drive Brackets and Complete Systems have the components tucked in tighter to the block and mounted lower for a more attractive and compact package. Ideal for LS engine swaps with limited space or where a low, more attractive appearance is desired.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eFor applications without A\/C or using factory A\/C bracket\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eSmall Compact Accessory Brackets \u0026amp; Complete Kits\u003c\/li\u003e\n      \u003cli\u003eModular System – Buy Brackets \u0026amp; Installation Kit or Complete Kits\u003c\/li\u003e\n      \u003cli\u003eFits Middle and Long Accessory Spacing\u003c\/li\u003e\n      \u003cli\u003eInstallation Kit 21-4 Required w\/ Long Spacing\u003c\/li\u003e\n      \u003cli\u003eP\/S Hardline Works w\/ Most Type II P\/S Pumps (Sold Separately)\u003c\/li\u003e\n      \u003cli\u003eCost Effective Solution\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559910904102,"sku":"20-155p","price":410.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-155_assembly_image.jpg?v=1777051338"},{"product_id":"20-156","title":"Low-Mount LS Drive System (Alt, P\/S w\/o A\/C) Driver's Side","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    Low-Mount LS Drive System (Alt, P\/S w\/o A\/C) Driver's Side\u003cul\u003e\n\u003cli\u003eSmall Compact Complete Kits\u003c\/li\u003e\n\u003cli\u003eFits Middle and Long Accessory Spacing\u003c\/li\u003e\n\u003cli\u003eInstallation Kit 21-4 Required w\/ Long Spacing\u003c\/li\u003e\n\u003cli\u003eP\/S Hardline Works w\/ Most Type II P\/S Pumps\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559912280358,"sku":"20-156","price":1185.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/048a96818a3aa3afa6765d02590c47a506e27cc3_0d4ba38e-5d03-4c1f-b6ce-67e2568c79a7.jpg?v=1757067537"},{"product_id":"20-156bk","title":"Low-Mount LS Drive System (Alt, P\/S w\/o A\/C) Driver's Side- Black Finish","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003e\"Holley's new Black Low-Mount Accessory Drive Brackets and Complete Systems have the components tucked in tighter to the block and mounted lower for a more attractive and compact package. Ideal for LS engine swaps with limited space or where a low, more attractive appearance is desired.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eLow-Mount LS Drive System (Alt, P\/S w\/o A\/C) Driver's Side\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eSmall Compact Complete Kits\u003c\/li\u003e\n      \u003cli\u003eFits Middle and Long Accessory Spacing\u003c\/li\u003e\n      \u003cli\u003eInstallation Kit 21-4 Required w\/ Long Spacing\u003c\/li\u003e\n      \u003cli\u003eP\/S Hardline Works w\/ Most Type II P\/S Pumps\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559912542502,"sku":"20-156bk","price":1844.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-155_dimens_d12ebafd-9340-4529-a5b6-2538667df741.jpg?v=1777051385"},{"product_id":"20-159","title":"Low-Mount LS Accessory Drive Bracket - Passenger's Side A\/C Bracket","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    Low-Mount LS Accessory Drive Bracket - Passenger's Side A\/C Bracket - Use w\/ Sanden SD7 Compressor Only\u003cul\u003e\n\u003cli\u003eSmall Compact Accessory Brackets \u0026amp; Complete Kits\u003c\/li\u003e\n\u003cli\u003eModular System  Buy Brackets \u0026amp; Installation Kit or Complete Kits\u003c\/li\u003e\n\u003cli\u003eFits Standard, Middle and Long Accessory Spacing\u003c\/li\u003e\n\u003cli\u003eCost Effective Solution\u003c\/li\u003e\n\u003cli\u003eAlso works on LSA supercharged engines\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559913328934,"sku":"20-159","price":219.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/048a96818a3aa3afa6765d02590c47a506e27cc3_166f658f-b506-42ac-a870-db93a137c872.jpg?v=1757067535"},{"product_id":"20-160","title":"Low-Mount LS Drive System (A\/C) w\/ Sanden SD7 Compressor - Passenger's Side","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    Low-Mount LS Drive System (A\/C) w\/ Sanden SD7 Compressor - Passenger's Side\u003cul\u003e\n\u003cli\u003eSmall Compact Complete Kit\u003c\/li\u003e\n\u003cli\u003eFits Standard, Middle, and Long Accessory Spacing (no installation kit required)\u003c\/li\u003e\n\u003cli\u003eCost Effective Solution\u003c\/li\u003e\n\u003cli\u003eAlso works on LSA supercharged engines\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559917424934,"sku":"20-160","price":764.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/048a96818a3aa3afa6765d02590c47a506e27cc3_4a5846b4-01d4-4f97-aa39-c1ffc2a2000d.jpg?v=1757067534"},{"product_id":"20-160bk","title":"Low-Mount LS Drive System (A\/C) w\/ Sanden SD7 Compressor\n- Passenger's Side- Black Finish","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eHolley's new Low-Mount Accessory Drive Brackets and Complete Systems have the components tucked in tighter to the block and mounted lower for a more attractive and compact package. Ideal for LS engine swaps with limited space or where a low, more attractive appearance is desired.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eLow-Mount LS Drive System (A\/C) w\/ Sanden SD7 Compressor - Passenger's Side\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eSmall Compact Complete Kit\u003c\/li\u003e\n      \u003cli\u003eFits Standard, Middle, and Long Accessory Spacing (no installation kit required)\u003c\/li\u003e\n      \u003cli\u003eCost Effective Solution\u003c\/li\u003e\n      \u003cli\u003eAlso works on LSA supercharged engines\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559918440742,"sku":"20-160bk","price":878.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-159_1_16e4794f-2b84-4429-a81f-0b4b92219b83.jpg?v=1777051425"},{"product_id":"20-162","title":"Holley Low-Mount LS Complete Accessory Drive System (Alt, P\/S \u0026 A\/C)","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    Includes SD7 A\/C Compressor, Alternator, P\/S Pump, Tensioner, Belt, \u0026amp; Pulleys\u003cul\u003e\n\u003cli\u003eSmall Compact Complete Accessory Drive Kit\u003c\/li\u003e\n\u003cli\u003eFits Middle and Long Accessory Spacing\u003c\/li\u003e\n\u003cli\u003eInstallation Kit 21-4 Required w\/ Long Spacing\u003c\/li\u003e\n\u003cli\u003eP\/S Hardline Works w\/ Most Type II P\/S Pumps (Sold Separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559918702886,"sku":"20-162","price":1873.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/032ffa886aae91b94d9c06bac049ba45e7f49280_ecc0dc16-1df9-4593-b681-bc6f7af9c549.jpg?v=1757067531"},{"product_id":"20-162bk","title":"Holley Low-Mount LS Complete Accessory Drive System (Alt, P\/S \u0026 A\/C)\n- Black Finish","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003e\"Holley's new Low-Mount Accessory Drive Complete Systems have the components tucked in tighter to the block and mounted lower for a more attractive and compact package. Ideal for LS engine swaps with limited space or where a low, more attractive appearance is desired.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eIncludes SD7 A\/C Compressor, Alternator, P\/S Pump, Tensioner, Belt, \u0026amp; Pulleys\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eSmall Compact Complete Accessory Drive Kit\u003c\/li\u003e\n      \u003cli\u003eFits Middle and Long Accessory Spacing\u003c\/li\u003e\n      \u003cli\u003eInstallation Kit 21-4 Required w\/ Long Spacing\u003c\/li\u003e\n      \u003cli\u003eP\/S Hardline Works w\/ Most Type II P\/S Pumps (Sold Separately)\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559918833958,"sku":"20-162bk","price":2015.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-162tc_4855fe48-5ab1-479c-bea7-2fa47ae7a47a.jpg?v=1777051466"},{"product_id":"20-162p","title":"Holley Low-Mount LS Complete Accessory Drive System (Alt, P\/S \u0026 A\/C)\n- Polished Finish","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003e\"Holley's new Low-Mount Accessory Drive Complete Systems have the components tucked in tighter to the block and mounted lower for a more attractive and compact package. Ideal for LS engine swaps with limited space or where a low, more attractive appearance is desired.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eIncludes SD7 A\/C Compressor, Alternator, P\/S Pump, Tensioner, Belt, \u0026amp; Pulleys\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eSmall Compact Complete Accessory Drive Kit\u003c\/li\u003e\n      \u003cli\u003eFits Middle and Long Accessory Spacing\u003c\/li\u003e\n      \u003cli\u003eInstallation Kit 21-4 Required w\/ Long Spacing\u003c\/li\u003e\n      \u003cli\u003eP\/S Hardline Works w\/ Most Type II P\/S Pumps (Sold Separately)\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559919587622,"sku":"20-162p","price":2591.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-162tc.jpg?v=1777051477"},{"product_id":"20-163","title":"Holley Low Mount LSA Accessory Drive Bracket Kit - Complete - Natural","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    Small Block Chevrolet - Gen III\/IV - LSA\u003cul\u003e\n\u003cli\u003eCompatible with the original LSA damper\/pulley and similar aftermarket versions\u003c\/li\u003e\n\u003cli\u003eCompatible with LSA and 2010-15 LS Camaro water pumps\u003c\/li\u003e\n\u003cli\u003eAll brackets, pulleys, and belts are supplied for both the supercharger and all accessories\u003c\/li\u003e\n\u003cli\u003eNotably more clearance for swap applications than other options\u003c\/li\u003e\n\u003cli\u003eIncludes Holley compact SD7 A\/C kit (P\/N 20-160)\u003c\/li\u003e\n\u003cli\u003eIncludes LT1 style premium 150-amp alternator\u003c\/li\u003e\n\u003cli\u003eIncludes Holley„s Integral Reservoir and Type II Power Steering Pump and Bracket w\/ baffled reservoir\u003c\/li\u003e\n\u003cli\u003ePower Steering Hard Line Adapter and P\/S Pulley Also Included\u003c\/li\u003e\n\u003cli\u003eOE pulley ratios for optimal accessory performance, allows for larger SC crank pulley\u003c\/li\u003e\n\u003cli\u003eOriginal Equipment look  Available in Natural and Black Finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559921062182,"sku":"20-163","price":2903.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/0a266e5dfc66872129858fa08438098745f0c27f_d253e4ec-a060-4a09-9e1c-1a0ef83438af.jpg?v=1757067528"},{"product_id":"20-163bk","title":"Holley Low Mount LSA Accessory Drive Bracket Kit - Complete - Black","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eIf you're looking to swap an LSA into your vehicle but your engine didn't come with accessories or the factory setup is too wide to fit your project, Holley has the solution. Rather than trying to track down each individual accessory you need, the LSA Accessory Drive Kit offers the total package in a clean, economical configuration in your choice of Natural or Black Finishes. It is even designed to work with the original LSA damper\/pulley and similar aftermarket versions.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eHolley's LSA complete accessory system has all accessories pulled in tighter than other accessory drives. The design offers superb engine visibility to show off your horsepower, not your accessories. The Holley designed alternator is just as innovative. This premium alternator utilizes 6-phase technology as found on the C7 Corvette. The compact and reliable SD7 A\/C compressor and Type II P\/S pump with baffled reservoir are also integrated. Easy assembly was a priority during the entire development of this accessory solution. Color graphical instructions walk you through every step of the ultra-easy installation.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eThis kit looks truly at home on the LSA engine, so much so that nobody will realize it didn't come this way from the factory.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eSmall Block Chevrolet - Gen III\/IV - LSA\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eCompatible with the original LSA damper\/pulley and similar aftermarket versions\u003c\/li\u003e\n      \u003cli\u003eCompatible with LSA and 2010-15 LS Camaro water pumps\u003c\/li\u003e\n      \u003cli\u003eAll brackets, pulleys, and belts are supplied for both the supercharger and all accessories\u003c\/li\u003e\n      \u003cli\u003eNotably more clearance for swap applications than other options\u003c\/li\u003e\n      \u003cli\u003eIncludes Holley compact SD7 A\/C kit (P\/N 20-160)\u003c\/li\u003e\n      \u003cli\u003eIncludes LT1 style premium 150-amp alternator\u003c\/li\u003e\n      \u003cli\u003eIncludes Holley’s Integral Reservoir and Type II Power Steering Pump and Bracket w\/ baffled reservoir\u003c\/li\u003e\n      \u003cli\u003ePower Steering Hard Line Adapter and P\/S Pulley Also Included\u003c\/li\u003e\n      \u003cli\u003eOE pulley ratios for optimal accessory performance, allows for larger SC crank pulley\u003c\/li\u003e\n      \u003cli\u003eOriginal Equipment look – Available in Natural and Black Finishes\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559928107302,"sku":"20-163bk","price":3043.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-163_installed_01_2accf6f5-d627-43ab-8a02-e964ff4d0a96.jpg?v=1777051511"},{"product_id":"20-165","title":"Holley Mid LSA\/LS Accessory Drive Bracket Kit - Power Steering - Natural","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    Small Block Chevrolet - Gen III\/IV - LSA\/LS\u003cul\u003e\n\u003cli\u003eCompatible with the original LSA damper\/pulley and similar aftermarket versions\u003c\/li\u003e\n\u003cli\u003eCompatible with Holley„s Integral Reservoir and Type II Power Steering Pump (198-101)\u003c\/li\u003e\n\u003cli\u003eP\/S hard line adapters available (197-207)\u003c\/li\u003e\n\u003cli\u003eCompatible with Holley P\/N 20-160 compact SD7 A\/C kit\u003c\/li\u003e\n\u003cli\u003eCompatible with LSA and 2010-15 LS Camaro water pumps\u003c\/li\u003e\n\u003cli\u003eNotably more clearance to swap applications than other options\u003c\/li\u003e\n\u003cli\u003eOE pulley ratios for optimal accessory performance, allows for larger SC crank pulley\u003c\/li\u003e\n\u003cli\u003eOriginal Equipment look  Available in Natural and Black Finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559929712934,"sku":"20-165","price":139.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/1d784c39ac1c8db9127cad4d55f041756b367aca_c8616eb8-57bd-44d2-bf50-0b23c959405d.jpg?v=1757067526"},{"product_id":"20-165bk","title":"Holley Mid LSA\/LS Accessory Drive Bracket Kit - Power Steering - Black","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eIf you're looking to swap an LSA or LS engine into your vehicle but your engine didn't come with a power steering pump or the factory setup is too wide to fit properly in your bay, Holley has the answer. These new LSA Accessory Drive Kits offer clean, economical mounting of all LS engine accessories. The 20-165 Power Steering Bracket pulls the pump in closer toward the engine when compared to the original LSA accessories, giving more clearance in swap applications. Also, Power Steering Hard Line Adapter 197-207 is not required, but makes a potentially daunting plumbing task quick and painless. There is no doubt this bracket kit looks truly at home on the LSA engine, so much so that nobody will realize it didn't come from factory this way.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eSmall Block Chevrolet - Gen III\/IV - LSA\/LS\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eCompatible with the original LSA damper\/pulley and similar aftermarket versions\u003c\/li\u003e\n      \u003cli\u003eCompatible with Holley’s Integral Reservoir and Type II Power Steering Pump (198-101)\u003c\/li\u003e\n      \u003cli\u003eP\/S hard line adapters available (197-207)\u003c\/li\u003e\n      \u003cli\u003eCompatible with Holley P\/N 20-160 compact SD7 A\/C kit\u003c\/li\u003e\n      \u003cli\u003eCompatible with LSA and 2010-15 LS Camaro water pumps\u003c\/li\u003e\n      \u003cli\u003eNotably more clearance to swap applications than other options\u003c\/li\u003e\n      \u003cli\u003eOE pulley ratios for optimal accessory performance, allows for larger SC crank pulley\u003c\/li\u003e\n      \u003cli\u003eOriginal Equipment look – Available in Natural and Black Finishes\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559930990886,"sku":"20-165bk","price":159.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-165bk_01_c1fc1a4e-08b3-4f63-824d-e6601bbc381a.jpg?v=1777051551"},{"product_id":"20-166","title":"Holley Mid LSA Accessory Drive Bracket Kit - Alternator - Natural","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    Small Block Chevrolet - Gen III\/IV - LSA\u003cul\u003e\n\u003cli\u003eCompatible with the original LSA damper\/pulley and similar aftermarket versions\u003c\/li\u003e\n\u003cli\u003eCompatible with all Holley Alternators\u003c\/li\u003e\n\u003cli\u003eNotably more clearance to swap applications than other options\u003c\/li\u003e\n\u003cli\u003eCompatible with Holley P\/N 20-160 compact SD7 A\/C kit\u003c\/li\u003e\n\u003cli\u003eCompatible with LSA and 2010-15 LS Camaro water pumps\u003c\/li\u003e\n\u003cli\u003eOE pulley ratios for optimal accessory performance, allows for larger SC crank pulley\u003c\/li\u003e\n\u003cli\u003eOriginal Equipment look  Available in Natural and Black Finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559931056422,"sku":"20-166","price":140.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/195aa9654d7b51c9002576db02db599a25ca9bee_d9ffd493-5e9d-4b50-8d98-b32032a90a61.jpg?v=1757067523"},{"product_id":"20-166bk","title":"Holley Mid LSA Accessory Drive Bracket Kit - Alternator - Black","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eIf you're looking to swap an LSA or LS engine into your vehicle but your engine didn't come with an alternator bracket or the factory setup is too wide to fit your project, Holley has the answer. The 20-166 Bracket tucks the Alternator in closer toward the engine when compared to the original LSA accessories, giving more clearance where needed. These brackets look truly at home on the LSA engine, so much so that nobody will realize it didn't come from factory this way.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eSmall Block Chevrolet - Gen III\/IV - LSA\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eCompatible with the original LSA damper\/pulley and similar aftermarket versions\u003c\/li\u003e\n      \u003cli\u003eCompatible with all Holley Alternators\u003c\/li\u003e\n      \u003cli\u003eNotably more clearance to swap applications than other options\u003c\/li\u003e\n      \u003cli\u003eCompatible with Holley P\/N 20-160 compact SD7 A\/C kit\u003c\/li\u003e\n      \u003cli\u003eCompatible with LSA and 2010-15 LS Camaro water pumps\u003c\/li\u003e\n      \u003cli\u003eOE pulley ratios for optimal accessory performance, allows for larger SC crank pulley\u003c\/li\u003e\n      \u003cli\u003eOriginal Equipment look – Available in Natural and Black Finishes\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559931679014,"sku":"20-166bk","price":159.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-166bk_04_e190b172-fafc-475b-a64f-59230d597eb0.jpg?v=1777051600"},{"product_id":"20-170","title":"Complete GM Gen V LT, L83, L84, L86, and L87 Accessory Drive System\nw\/ Alt, P\/S, A\/C, Water Pump, Belts, and Spacers","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    Complete GM Gen V LT Accessory Drive System w\/ Alt, P\/S, A\/C, Water Pump, Belts, and Spacers.  Includes Installation kit 21-5.  Must be used with Gen V LT Truck Damper.\u003cul\u003e\n\u003cli\u003eIncludes center mounted LS water pump that makes the LT engine look like it belongs in your swap project vehicle!\u003c\/li\u003e\n\u003cli\u003eWorks with LT Truck Harmonic Balancer (often already on donor engine)\u003c\/li\u003e\n\u003cli\u003eCost Effective and Proven Solution\u003c\/li\u003e\n\u003cli\u003eIncludes Water Pump, Installation Kit, Water Pump Spacers, Bracket Spacers, Wiring Harness, and Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559931777318,"sku":"20-170","price":2249.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/0cba0263c6a86e519eb43841c968a8a812c9ff63_58bfa9b1-eb9c-4be2-8e4d-1845e97bc529.jpg?v=1757067521"},{"product_id":"20-180bk","title":"Holley Premium Black Mid-Mount Complete Accessory System","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eHolley's Premium Mid-Mount complete accessory system has all accessories pulled in tighter than other accessory drives. At the heart of the system is a \"bracketless\" design, where the accessories bolt directly to the water pump for a clean, integrated form. The design offers superb engine visibility to show off your horsepower, not your accessories. Among the many swap friendly features are bottom heater outlets for clearance in tight applications. The Holley designed alternator is just as innovative. This premium alternator utilizes 6-phase technology as found on the C7 Corvette. The water pump also shares its design efficiencies with that of the C7 Corvette. The compact and reliable SD7 A\/C compressor and Type II P\/S pump with baffled reservoir are also integrated.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eThe Mid-Mount drive completes Holley's trilogy of accessory solutions giving a third option compared to the High and Low-Mount previously released. All three accessory solutions are for LS engines.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eWhen we say \"complete\", we mean complete. The Mid-Mount system comes with everything you need. All accessories are included; the water pump, A\/C compressor, Alternator, P\/S pump with reservoir, and an SFI certified damper w\/hard anodized billet crank pulley. All pulleys and the belt are supplied. Even heater hose adapters, power steering to -6 AN hardline, and the alternator plug\/harness are included. Easy assembly was a priority during the entire development of this accessory solution. Color graphical instructions walk you through every step of the ultra-easy installation.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eThe Premium Mid-Mount system comes with dress up pulley covers and an SFI certified damper. Partnered with this damper is a billet 6061-T6 aluminum hard anodized crank pulley. This system is ready for the racetrack if you want to play or just be ready for anything on the street.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003ePatent - www.holley.com\/patents\/\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eLS Engine Drive includes SD7 A\/C Compressor, Alternator, P\/S Pump, Tensioner, SFI certified damper w\/hard anodized billet crank pulley, Belt, \u0026amp; Pulleys\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eBracketless accessory mounting with ultra-easy assembly\u003c\/li\u003e\n      \u003cli\u003eBottom outlet heater hose options for swap application clearance\u003c\/li\u003e\n      \u003cli\u003eLT1 style premium 150 amp alternator\u003c\/li\u003e\n      \u003cli\u003eLT1 style water pump cartridge design\u003c\/li\u003e\n      \u003cli\u003eCompact SD7 A\/C compressor\u003c\/li\u003e\n      \u003cli\u003eType II power steering pump with baffled reservoir\u003c\/li\u003e\n      \u003cli\u003eP\/S adapter hardline to AN -6 adapter included\u003c\/li\u003e\n      \u003cli\u003eSteam tube input port\u003c\/li\u003e\n      \u003cli\u003eShortened top outlet nipple for more radiator hose turns and routing room\u003c\/li\u003e\n      \u003cli\u003eOE pulley ratios for optimal accessory performance\u003c\/li\u003e\n      \u003cli\u003eNo adapters\/spacers required!\u003c\/li\u003e\n      \u003cli\u003eBillet tensioner cover\u003c\/li\u003e\n      \u003cli\u003eBillet alternator, and compressor pulley covers\u003c\/li\u003e\n      \u003cli\u003eSFI certified damper w\/hard anodized billet crank pulley\u003c\/li\u003e\n      \u003cli\u003eWorks with all common aftermarket and factory Throttle bodies and intakes.\u003c\/li\u003e\n      \u003cli\u003eWorks with VVT applications\u003c\/li\u003e\n      \u003cli\u003eWorks with Hooker turbo manifolds.\u003c\/li\u003e\n      \u003cli\u003eFit ALL wet sump LS engines except supercharged. Also will fit dry sump LS engines converted to wet sump.\u003c\/li\u003e\n      \u003cli\u003eBlack Finish\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559933546790,"sku":"20-180bk","price":3511.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/0118114_17c586db-5e5f-4c9f-a1fd-92738f5fe3e0.jpg?v=1777051629"},{"product_id":"20-180p","title":"Holley Premium Polished Mid-Mount Complete Accessory System","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eHolley's Premium Mid-Mount complete accessory system has all accessories pulled in tighter than other accessory drives. At the heart of the system is a \"bracketless\" design, where the accessories bolt directly to the water pump for a clean, integrated form. The design offers superb engine visibility to show off your horsepower, not your accessories. Among the many swap friendly features are bottom heater outlets for clearance in tight applications. The Holley designed alternator is just as innovative. This premium alternator utilizes 6-phase technology as found on the C7 Corvette. The water pump also shares its design efficiencies with that of the C7 Corvette. The compact and reliable SD7 A\/C compressor and Type II P\/S pump with baffled reservoir are also integrated.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eThe Mid-Mount drive completes Holley's trilogy of accessory solutions giving a third option compared to the High and Low-Mount previously released. All three accessory solutions are for LS engines.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eWhen we say \"complete\", we mean complete. The Mid-Mount system comes with everything you need. All accessories are included; the water pump, A\/C compressor, Alternator, P\/S pump with reservoir, and an SFI certified damper w\/hard anodized billet crank pulley. All pulleys and the belt are supplied. Even heater hose adapters, power steering to -6 AN hardline, and the alternator plug\/harness are included. Easy assembly was a priority during the entire development of this accessory solution. Color graphical instructions walk you through every step of the ultra-easy installation.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eThe Premium Mid-Mount system comes with dress up pulley covers and an SFI certified damper. Partnered with this damper is a billet 6061-T6 aluminum hard anodized crank pulley. This system is ready for the racetrack if you want to play or just be ready for anything on the street.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003ePatent - www.holley.com\/patents\/\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eLS Engine Drive includes SD7 A\/C Compressor, Alternator, P\/S Pump, Tensioner, SFI certified damper w\/hard anodized billet crank pulley, Belt, \u0026amp; Pulleys\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eBracketless accessory mounting with ultra-easy assembly\u003c\/li\u003e\n      \u003cli\u003eBottom outlet heater hose options for swap application clearance\u003c\/li\u003e\n      \u003cli\u003eLT1 style premium 150 amp alternator\u003c\/li\u003e\n      \u003cli\u003eLT1 style water pump cartridge design\u003c\/li\u003e\n      \u003cli\u003eCompact SD7 A\/C compressor\u003c\/li\u003e\n      \u003cli\u003eType II power steering pump with baffled reservoir\u003c\/li\u003e\n      \u003cli\u003eP\/S adapter hardline to AN -6 adapter included\u003c\/li\u003e\n      \u003cli\u003eSteam tube input port\u003c\/li\u003e\n      \u003cli\u003eShortened top outlet nipple for more radiator hose turns and routing room\u003c\/li\u003e\n      \u003cli\u003eOE pulley ratios for optimal accessory performance\u003c\/li\u003e\n      \u003cli\u003eNo adapters\/spacers required!\u003c\/li\u003e\n      \u003cli\u003eBillet tensioner cover\u003c\/li\u003e\n      \u003cli\u003eBillet alternator, and compressor pulley covers\u003c\/li\u003e\n      \u003cli\u003eSFI certified damper w\/hard anodized billet crank pulley\u003c\/li\u003e\n      \u003cli\u003eWorks with all common aftermarket and factory Throttle bodies and intakes.\u003c\/li\u003e\n      \u003cli\u003eWorks with VVT applications\u003c\/li\u003e\n      \u003cli\u003eWorks with Hooker turbo manifolds.\u003c\/li\u003e\n      \u003cli\u003eFit ALL wet sump LS engines except supercharged. Also will fit dry sump LS engines converted to wet sump.\u003c\/li\u003e\n      \u003cli\u003ePolished Finish\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559933579558,"sku":"20-180p","price":4223.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-180_front17341_d5c92255-0f73-47f5-bf31-a101e78ea256.jpg?v=1777051644"},{"product_id":"20-181","title":"Holley Premium Mid-Mount Race Accessory System","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    LS Engine Drive includes Alternator, P\/S Pump, Tensioner, SFI certified damper w\/hard anodized billet crank pulley, Belt, \u0026amp; Pulleys\u003cul\u003e\n\u003cli\u003eBracketless accessory mounting with ultra-easy assembly\u003c\/li\u003e\n\u003cli\u003eBottom outlet heater hose options for swap application clearance\u003c\/li\u003e\n\u003cli\u003eLT1 style premium 150 amp alternator\u003c\/li\u003e\n\u003cli\u003eLT1 style water pump cartridge design\u003c\/li\u003e\n\u003cli\u003eType II power steering pump with baffled reservoir\u003c\/li\u003e\n\u003cli\u003eP\/S adapter hardline to AN -6 adapter included\u003c\/li\u003e\n\u003cli\u003eSteam tube input port\u003c\/li\u003e\n\u003cli\u003eShortened top outlet nipple for more radiator hose turns and routing room\u003c\/li\u003e\n\u003cli\u003eOE pulley ratios for optimal accessory performance\u003c\/li\u003e\n\u003cli\u003eNo adapters\/spacers required!\u003c\/li\u003e\n\u003cli\u003eBillet alternator, and compressor pulley covers\u003c\/li\u003e\n\u003cli\u003eSFI certified damper w\/hard anodized billet crank pulley\u003c\/li\u003e\n\u003cli\u003eWorks with all common aftermarket and factory Throttle bodies and intakes.\u003c\/li\u003e\n\u003cli\u003eWorks with VVT applications\u003c\/li\u003e\n\u003cli\u003eWorks with Hooker turbo manifolds.\u003c\/li\u003e\n\u003cli\u003eFits ALL LS engines except with dry sump and\/or supercharger.\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559934529830,"sku":"20-181","price":3324.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/086421d59a250fe481123ba55fcf9966568d7810_9935b7e2-5c2d-46f8-8005-3063255c74ed.jpg?v=1757067515"},{"product_id":"20-181bk","title":"Holley Premium Mid-Mount Race Accessory System-Black Finish","description":"\u003cdiv class=\"billy_features_content\"\u003e\n  \u003ch3\u003eOverview\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cp\u003eHolley's Mid-Mount Accessory Drive System is now offered for the serious racer in mind. If you need a front drive system for your LS engine racecar, they are now available without air conditioning and power steering depending upon your needs!\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eHolley's Premium Mid-Mount complete accessory system has all accessories pulled in tighter than other accessory drives. At the heart of the system is a \"bracketless\" design, where the accessories bolt directly to the water pump for a clean, integrated form. The design offers superb engine visibility to show off your horsepower, not your accessories. Among the many swap friendly features are bottom heater outlets for clearance in tight applications. The Holley designed alternator is just as innovative. This premium alternator utilizes 6-phase technology as found on the C7 Corvette. The water pump also shares its design efficiencies with that of the C7 Corvette. The compact and reliable Type II P\/S pump with baffled reservoir are also integrated.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eThe Mid-Mount drive completes Holley's trilogy of accessory solutions giving a third option compared to the High and Low-Mount previously released. All three accessory solutions are for LS engines.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eWhen we say \"complete\", we mean complete. The Mid-Mount system comes with everything you need. All accessories are included; the water pump, Alternator, P\/S pump with reservoir, and an SFI certified damper w\/hard anodized billet crank pulley. All pulleys and the belt are supplied. Even heater hose adapters, power steering to -6 AN hardline, and the alternator plug\/harness are included. Easy assembly was a priority during the entire development of this accessory solution. Color graphical instructions walk you through every step of the ultra-easy installation.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eThe Premium Mid-Mount system comes with dress up pulley covers and an SFI certified damper. Partnered with this damper is a billet 6061-T6 aluminum hard anodized crank pulley. This system is ready for the racetrack if you want to play or just be ready for anything on the street.\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003ePatent - www.holley.com\/patents\/\u003c\/p\u003e\n    \u003cp class=\"mt-2\"\u003eLS Engine Drive includes Alternator, P\/S Pump, Tensioner, SFI certified damper w\/hard anodized billet crank pulley, Belt, \u0026amp; Pulleys\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\n  \u003cdiv\u003e\n    \u003cul\u003e\n      \u003cli\u003eBracketless accessory mounting with ultra-easy assembly\u003c\/li\u003e\n      \u003cli\u003eBottom outlet heater hose options for swap application clearance\u003c\/li\u003e\n      \u003cli\u003eLT1 style premium 150 amp alternator\u003c\/li\u003e\n      \u003cli\u003eLT1 style water pump cartridge design\u003c\/li\u003e\n      \u003cli\u003eType II power steering pump with baffled reservoir\u003c\/li\u003e\n      \u003cli\u003eP\/S adapter hardline to AN -6 adapter included\u003c\/li\u003e\n      \u003cli\u003eSteam tube input port\u003c\/li\u003e\n      \u003cli\u003eShortened top outlet nipple for more radiator hose turns and routing room\u003c\/li\u003e\n      \u003cli\u003eOE pulley ratios for optimal accessory performance\u003c\/li\u003e\n      \u003cli\u003eNo adapters\/spacers required!\u003c\/li\u003e\n      \u003cli\u003eBillet alternator,\u003c\/li\u003e\n      \u003cli\u003eSFI certified damper w\/hard anodized billet crank pulley\u003c\/li\u003e\n      \u003cli\u003eWorks with all common aftermarket and factory Throttle bodies and intakes.\u003c\/li\u003e\n      \u003cli\u003eWorks with VVT applications\u003c\/li\u003e\n      \u003cli\u003eWorks with Hooker turbo manifolds.\u003c\/li\u003e\n      \u003cli\u003eFits ALL LS engines except with dry sump and\/or supercharger.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":50559935775014,"sku":"20-181bk","price":3277.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/1666\/1542\/files\/20-181bk_011984_202a7fc2-fef7-4361-90e0-49ad1d537318.jpg?v=1777051699"}],"url":"https:\/\/billysspeedshop.com\/collections\/engine-belts-accessory-drive.oembed","provider":"Billys Speed Shop","version":"1.0","type":"link"}