Haltech Hall Effect Sensor - Red Single Channel Hall Effect Sensor M12x1.0

Overview

The Haltech Red Single Channel Hall Effect Sensor delivers precise trigger signal detection for cam position sensing and auxiliary trigger applications. Built to M12x1.0 thread specification, this sensor provides the rock-solid signal integrity your Haltech ECU needs for accurate timing control across the rev range. Essential for sequential injection setups and advanced ignition timing strategies on modified engines.

Technical Specifications

• Part Number: HT-010610
• Thread Size: M12x1.0
• Channel Configuration: Single Channel
• Sensor Type: Hall Effect
• Output: Digital square wave
• Operating Voltage: 5-12V

Why You Need This

Hall effect sensors are the backbone of modern engine management timing control, and this single channel unit excels where cam position sensing is critical. Unlike variable reluctance sensors that can suffer from noise at low RPM, hall effect sensors provide clean digital signals right down to cranking speed. This makes them perfect for sequential fuel injection setups on modified engines where precise cam timing detection is non-negotiable.

We see this sensor regularly specified on LS swap builds where the factory reluctor wheel setup needs supplementing with cam position data, RB25/26 conversions requiring individual cylinder control, and 2JZ builds running aggressive cam profiles where timing accuracy becomes critical. The M12x1.0 thread matches common aftermarket trigger wheel mounting points, and the robust construction handles the heat and vibration of hard-driven engines. Without proper cam position sensing, you're limited to batch fire injection and basic ignition timing — this sensor unlocks your Haltech's full sequential potential.

ECU & System Compatibility

Compatible with the full Haltech Elite and Nexus range, including Elite 550/750/1000/1500/2000/2500 and Nexus R3/R5 series. Works with any Haltech ECU equipped with hall effect sensor inputs — contact our team to confirm specific wiring requirements for your ECU model and trigger wheel configuration.

What's in the Box

• Haltech Red Single Channel Hall Effect Sensor
• M12x1.0 threaded body
• Connector leads (requires splicing to ECU harness)

Complete Your Build

Most customers building a complete Haltech engine management system also add the GM 1 Bar MAP Sensor (HT-010100) for manifold pressure sensing and our Air Temp Sensor (HT-010200) for density correction. These three sensors form the core measurement package for most naturally aspirated and moderate boost applications. Billy's keeps all these sensors in UK stock with same-day despatch, and our pre-sales team can advise on the complete sensor package for your specific build requirements.