Plug and Pins Only - Matching Set Deutsch DTM-3 Connectors (7.5 Amp)

Overview

Professional-grade Deutsch DTM-3 connector set delivering reliable 7.5 amp capacity for critical engine management circuits. These matching plug and pin assemblies provide the weatherproof, vibration-resistant connections your Haltech ECU installation demands, whether you're wiring boost control solenoids, idle air controllers, or MAP sensor feeds.

Technical Specifications

• Part Number: HT-031013
• Current Rating: 7.5 Amp continuous
• Contact Configuration: 3-way DTM series
• Connector Type: Deutsch DTM waterproof
• Contact Material: Gold-plated copper alloy
• Sealing: IP67 environmental protection

Why You Need This

Every professional engine management installation relies on bulletproof connections, and cheap automotive connectors simply don't cut it when you're running boost control, drive-by-wire throttles, or precision sensor circuits. The Deutsch DTM-3 represents the gold standard in motorsport wiring — the same connector technology trusted in Formula 1, rally cars, and military applications. These aren't your typical blade terminals that corrode, loosen, or fail when exposed to heat cycling and vibration.

In real-world builds, we see these connectors used extensively for Haltech boost control solenoid connections on turbo LS swaps, MAP sensor circuits on RB25/RB26 conversions, and IAC valve connections on SR20 and 2JZ EFI swaps. The 7.5 amp rating handles most auxiliary outputs comfortably, whilst the triple-seal design prevents moisture ingress that kills standard automotive connectors. When you're invested in a proper Haltech setup, protecting those critical control circuits with genuine Deutsch hardware is essential insurance.

ECU & System Compatibility

Compatible with the full Haltech Elite and Nexus range for auxiliary output connections, sensor circuits, and actuator wiring. Particularly suited for Elite 550/750/1000/1500/2000/2500 auxiliary outputs and Nexus R3/R5 expansion modules. Contact our team to confirm optimal application for your specific ECU configuration and wiring requirements.

What's in the Box

• Deutsch DTM-3 male connector housing with pins
• Deutsch DTM-3 female connector housing with sockets
• Gold-plated contact pins (3-way set)
• Environmental sealing components

Complete Your Build

Professional installations require proper tooling and complementary components. Contact our technical team for recommended crimp tools, heat shrink, and additional Deutsch connectors sized for your complete Haltech harness build. We maintain comprehensive UK stock of Deutsch connector families and can advise on the optimal connector strategy for your specific application, from simple NA setups to complex turbo builds requiring multiple auxiliary circuits.