Bosch 1462cc injectors - Flowmatched set of 8 (0280158333)

Overview

These flowmatched Bosch 1462cc injectors deliver the massive fuel flow needed for extreme power builds — each injector flows 140lb/hr, making this set perfect for 1000+ horsepower applications. Genuine Bosch quality with high-impedance design and E85 compatibility ensures reliable operation under the most demanding conditions.

Technical Specifications

• Part Number: HT-080107
• Bosch Part Number: 0280158333
• Flow Rate: 1462cc/min (140lb/hr) at 3 bar
• Impedance: High (12+ ohms)
• Fuel Compatibility: Petrol, E85, race fuels
• Spray Pattern: Single cone
• Quantity: Set of 8 (flowmatched)
• Connector Type: EV1 (Jetronic)

Why You Need This

When you're pushing serious power through a built V8 — whether it's a turbo LS in a drift car, a supercharged Coyote, or a twin-turbo RB26 — fuel delivery becomes the limiting factor. These 1462cc Bosch injectors are sized for extreme applications where standard injectors simply can't keep up. The high-impedance design means they'll work directly with any Haltech ECU without additional resistor boxes or driver modifications that low-impedance injectors require.

Each set is flowmatched to within 2%, critical when you're running this much fuel flow. Mismatched injectors create rich and lean cylinders, leading to detonation on the lean cylinders and poor power on the rich ones. The single-cone spray pattern provides excellent fuel atomisation whilst maintaining good penetration — essential for large-displacement engines or forced induction applications where you need fuel to reach across large combustion chambers. These injectors support E85 ethanol fuel, which many high-power builders prefer for its superior knock resistance and cooling properties.

ECU & System Compatibility

Compatible with the full Haltech Elite and Nexus range including Elite 550, 750, 1000, 1500, 2000, and 2500 models, plus Nexus R3, R5, and Rebel ECUs. The high-impedance design works directly with Haltech's internal injector drivers without requiring external amplifiers or resistor packs.

What's in the Box

• 8x Bosch 1462cc injectors (0280158333) - flowmatched set
• 8x EV1 injector connectors
• 8x connector terminals
• 8x injector boots/seals

Complete Your Build

Most customers running injectors of this size also require a high-flow fuel system to support them. Contact our technical team to discuss fuel pump sizing, rail modifications, and ECU calibration requirements for your specific application. We hold comprehensive Haltech ECU stock in the UK and can provide complete fuel system packages with same-day despatch. Our in-house tuners have extensive experience calibrating high-flow injector setups and can provide remote tuning support or arrange dyno sessions at our facility.