Haltech Elite CAN Cable DTM-4 - 8 pin Blk Tyco 150mm (6") Length: 150mm (6")

Overview

The Haltech Elite CAN Cable DTM-4 to 8-pin Black Tyco bridges your Elite ECU's CAN bus to aftermarket devices requiring the robust 8-pin Tyco connector format. Essential for integrating dash systems, data loggers, and auxiliary controllers into professional builds where reliable CAN communication is non-negotiable. At 150mm length, it provides the precise reach needed for clean, interference-free installations.

Technical Specifications

• Part Number: HT-130031
• Length: 150mm (6 inches)
• Connector A: DTM-4 (Elite ECU CAN port)
• Connector B: 8-pin Black Tyco
• Wire Gauge: CAN-specification twisted pair
• Operating Temperature: -40°C to +125°C

Why You Need This

CAN bus communication failures are a nightmare in high-performance builds — one dodgy connection and your entire data network goes dark. This isn't just another cable; it's engineered specifically for the Elite ECU's CAN architecture and the demanding 8-pin Tyco format used by premium aftermarket devices. We see this constantly in motorsport builds where dashboard systems like AiM or Stack units need bulletproof CAN integration with the Elite's real-time data stream.

The 150mm length is deliberately chosen for typical engine bay routing — long enough to reach auxiliary mounting points without excess cable creating EMI issues, short enough to maintain signal integrity in high-noise environments. Whether you're running an LS swap with aftermarket dash, RB26 drag build with data acquisition, or circuit-prepared 2JZ needing comprehensive monitoring, this cable ensures your CAN network performs flawlessly under pressure.

ECU & System Compatibility

Compatible with the full Haltech Elite range including Elite 550, 750, 1000, 1500, 2000, and 2500 ECUs. The DTM-4 connector matches the Elite's dedicated CAN port specification, while the 8-pin Tyco end interfaces with professional aftermarket devices requiring this robust connector standard.

What's in the Box

• Haltech Elite CAN Cable DTM-4 to 8-pin Black Tyco (150mm)
• Technical documentation and pinout reference

Complete Your Build

Most customers building comprehensive data systems also add CAN termination resistors and additional CAN cables for multi-device networks. Our technical team can specify the complete CAN architecture for your build — we stock the full range of Haltech CAN accessories and understand the integration requirements for popular aftermarket systems. Contact our pre-sales team to discuss your specific installation and ensure you have everything needed for a first-time success.