Haltech Elite CAN Cable DTM-4 - 8 pin Blk Tyco 1200mm (48") Length: 1200mm (48")

Overview

The Haltech Elite CAN Cable DTM-4 to 8-pin Black Tyco delivers reliable CAN bus communication between your Elite ECU and auxiliary systems at 1200mm length. Purpose-built with DTM-4 and Tyco connectors, this cable maintains signal integrity in demanding motorsport environments where aftermarket loggers, displays, or secondary controllers need seamless data exchange with your Elite ECU.

Technical Specifications

• Part Number: HT-130035
• Length: 1200mm (48")
• Connector A: DTM-4 (Haltech Elite ECU side)
• Connector B: 8-pin Black Tyco
• Application: CAN bus communication
• Wire Gauge: Motorsport specification twisted pair

Why You Need This

Modern performance builds demand more than just engine management — data logging, dashboard displays, traction control systems, and boost controllers all need to communicate with your Elite ECU via CAN bus. The DTM-4 to 8-pin Tyco cable is the critical link that makes this possible. Without proper CAN communication, you're flying blind on crucial parameters, unable to log comprehensive data, or missing real-time feedback that could prevent expensive engine damage.

We see this cable constantly in serious builds — turbo LS swaps running MoTeC displays, track-focused SR20DET setups with AiM loggers, or comprehensive RB26 builds integrating boost control with wideband feedback. The 1200mm length provides routing flexibility around modern engine bays while maintaining the twisted-pair construction essential for noise-free CAN signals. Poor quality CAN cables cause intermittent communication dropouts, corrupted data logging, or complete system failures when you need them most.

ECU & System Compatibility

Compatible with the full Haltech Elite range including Elite 550, Elite 750, Elite 1000, Elite 1500, Elite 2000, and Elite 2500 ECUs. The DTM-4 connector interfaces directly with your Elite's CAN output, while the 8-pin Tyco end connects to compatible aftermarket devices including data loggers, dashboard displays, and auxiliary controllers from leading manufacturers.

What's in the Box

• 1x Haltech Elite CAN Cable DTM-4 to 8-pin Black Tyco (1200mm)
• Pre-terminated connectors ready for installation

Complete Your Build

Most customers building comprehensive data acquisition systems also add CAN-enabled wideband controllers, professional data loggers, or motorsport dashboard displays. Our technical team regularly spec complete CAN networks for serious builds — from basic logging setups to full telemetry systems. Contact our team for guidance on CAN bus architecture and compatible devices. With UK stock and expert pre-sales advice, we'll ensure your CAN communication strategy delivers reliable data when it counts.