Haltech Elite CAN Cable DTM-4 - 8 pin Blk Tyco 2400mm (92") Length: 2400mm (92")

Overview

The Haltech Elite CAN Cable DTM-4 to 8-pin Black Tyco delivers professional-grade CAN bus communication across your Elite ECU system. At 2400mm (92"), this cable provides the reach needed for clean routing in larger engine bays — from LS swap conversions to twin-turbo setups where you need reliable data transmission between your Elite ECU and CAN-enabled devices like dash displays, wideband controllers, or auxiliary modules.

Technical Specifications

• Part Number: HT-130037
• Length: 2400mm (92")
• Connector Type: DTM-4 to 8-pin Black Tyco
• Application: Haltech Elite CAN Bus Communication
• Wire Gauge: CAN-spec twisted pair construction
• Termination: Factory-crimped professional connectors

Why You Need This

CAN bus communication is the backbone of modern ECU systems, but cheap or incorrectly specified cables cause data dropouts, dash display glitches, and intermittent logging issues that'll drive you mad during tuning. This genuine Haltech cable uses the correct twisted-pair construction with proper impedance matching — critical for reliable high-speed data transmission. The DTM-4 connector interfaces directly with your Elite ECU's CAN output, whilst the 8-pin Tyco end connects to compatible devices like AEM CD-7 dashes, Haltech IQ3 displays, or IO expander boxes.

The 2400mm length is perfect for larger applications — think LS swaps in S-chassis builds where the ECU sits in the boot, RB26 conversions with dash-mounted displays, or any setup where you need to route CAN signals across the vehicle without joins or extensions that introduce resistance and potential failure points. We've seen too many builds hampered by bodged CAN wiring using inappropriate cable — this eliminates those headaches from day one.

ECU & System Compatibility

Designed specifically for Haltech Elite series ECUs including Elite 550, 750, 1000, 1500, 2000, and 2500 models. The DTM-4 connector matches the CAN output port specification across the Elite range. Compatible with any CAN-enabled device using the 8-pin Black Tyco connector standard. Contact our technical team to confirm compatibility with your specific dashboard or auxiliary device setup.

What's in the Box

• 1x Haltech Elite CAN Cable DTM-4 to 8-pin Black Tyco (2400mm length)
• Factory-crimped connectors with proper strain relief
• CAN-specification twisted pair cable construction

Complete Your Build

Most customers building comprehensive Elite ECU systems also add CAN termination resistors and additional CAN cables for multi-device setups. Consider our Elite wiring harness bundles if you're doing a complete engine conversion — we can supply pre-configured packages that eliminate compatibility guesswork. Our technical team has extensive experience with Elite ECU installations and can recommend the complete CAN infrastructure for your specific build, all from UK stock with fast despatch and proper pre-sales support.