Search over 60,000 products...
SNIPER 2 5" PDM KIT, POLISH...
Get notified when this item is back in stock
Press & drag to view
Holley Sniper EFI
Product Details
🔧
Vehicle Compatibility
Fits SNIPER 2 5" PDM KIT, POLISHED, SBF IGN - Sniper 2 EFI Bundle with HyperSpark Ignition System.
Please refer to manufacturer specifications for complete compatibility information.
⭐
Key Features
Sniper 2 EFI Bundle with HyperSpark Ignition System
The #1 selling EFI conversion just got better…again! We’re bundling our top selling Sniper 2 packages and passing along maximum savings! Available for small block Chevrolet, big block Chevrolet, and 8.2-inch deck small block Ford (5.0 base), these kits include a HyperSpark distributor, HyperSpark coil, and a HyperSpark 2 ignition box. Coupled with a 3.5” or 5" color LCD touchscreen handheld, Power Distribution Module (PDM), and either a base or master (in-line fuel system) Sniper 2 kit, these are the most complete Sniper EFI conversion kits ever offered by Holley. The PDM module was specifically designed to provide the easiest wiring experience for Sniper 2 kits that are paired with a HyperSpark ignition. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screws. Battery power, ground, and a switched 12V source are all that's required from your vehicle to power the PDM and your Sniper 2 system.
Make your classic drive like a modern fuel injected vehicle, including better cold starts, smooth drivability, and improved fuel economy. Sniper 2 was designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manuals and online videos. The handheld user-friendly setup wizard has you answer a few simple questions about your engine and the system will begin self-tuning with no laptop or tuning experience required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI system. Take complete control and make the conversion to EFI with a Sniper 2 EFI HyperSpark Ignition bundle.
The #1 selling EFI conversion just got better…again! We’re bundling our top selling Sniper 2 packages and passing along maximum savings! Available for small block Chevrolet, big block Chevrolet, and 8.2-inch deck small block Ford (5.0 base), these kits include a HyperSpark distributor, HyperSpark coil, and a HyperSpark 2 ignition box. Coupled with a 3.5” or 5" color LCD touchscreen handheld, Power Distribution Module (PDM), and either a base or master (in-line fuel system) Sniper 2 kit, these are the most complete Sniper EFI conversion kits ever offered by Holley. The PDM module was specifically designed to provide the easiest wiring experience for Sniper 2 kits that are paired with a HyperSpark ignition. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screws. Battery power, ground, and a switched 12V source are all that's required from your vehicle to power the PDM and your Sniper 2 system.
Make your classic drive like a modern fuel injected vehicle, including better cold starts, smooth drivability, and improved fuel economy. Sniper 2 was designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manuals and online videos. The handheld user-friendly setup wizard has you answer a few simple questions about your engine and the system will begin self-tuning with no laptop or tuning experience required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI system. Take complete control and make the conversion to EFI with a Sniper 2 EFI HyperSpark Ignition bundle.
🎬
Product Videos
No videos available for this product.
📋
Product Specifications
Accelerometer Support
No
Air Metering Style
Speed Density
Boost Control
No
Brand
Holley Sniper EFI
CAN-BUS Support
Yes
Category
Air and Fuel Delivery
CFM
800
Coast Guard Approved
No
Coil Per Cylinder Ignition Support
No
Datalogging Support
Yes
Distributor Included
Ford Small Block
Dry Nitrous Control
No
e85 Support
No
EGT Support
No
Emission Code
3
Finish
Shiny
Flange Style
4150
Forced Induction HP@60PSI
575
Forced Induction Support
Yes
Fuel Filter Included
No
Fuel Hose Included
No
Fuel Injectors Included
Yes
Fuel Pressure Regulator Included
No
Fuel Pressure
58.5 PSI
Fuel Pump Included
No
Fuel System
Not Included
Grade Type
Performance
Height
3.28"
HyperSpark Ignition Kit
Ford Small Block 8.2 Deck
Idle Air Control Motor Included
Yes
Ignition Timing Control
Yes
Individual Cylinder Fuel Corrections
No
Injector Quantity
4
Injector Size
100 lb/hr @ 58.5 PSI
Inlet / Outlet Size
9/16-18 Female O-Ring (AN 6)
Intake Manifold Included
No
Knock Retard Support
No
MAP Sensor
2
Max Horsepower Rating
650 Naturally Aspirated
Maximum Injector Quantity Supported
4
Model
4150 EFI Conversion Throttle Body
Multi-Stage Nitrous Control
No
Naturally Aspirated HP@60PSI
650
part type
Fuel Injection Conversion Kit
PDM
Yes
Power Distribution Module
Yes
Product Type
Sniper EFI
Progressive Nitrous Control
No
Self-Tuning
Yes
Throttle Body Air Flow Rate
800
Throttle Body Material
Aluminum
Throttle Position Sensor Included
Yes
Traction Control Support
No
Transmission
All
User Interface
5 in Handheld
User-Tuneable
Yes
Warning
California Proposition 65
Warranty
Two Year Standard
Wet Nitrous Control
No
📦
Package Contents
Kit includes all necessary components. Please refer to manufacturer specifications for detailed package contents.