Search for parts here
Press & drag to view
Holley Sniper EFIPart 550-511-3xkMade in US
Product Details
⭐
Key Features
Nitrous Control Not Supported In Sniper 2 EFI Software
New for Sniper 2 is the optional Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12-volt source is all that's required from your vehicle to power the PDM and your Sniper EFI. | If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. | The #1 EFI conversion system just got better. Introducing Sniper 2 EFI - a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. We took everything that we learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. | Make your classic drive like a modern fuel-injected vehicle, including easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine and the system will begin self-tuning with no laptop or tuning experience required.
Inline Pump - Without PDM - 3.5 in. Handheld
- (NEW) Redesigned throttle shaft and plate geometry for a smoother throttle feel
- The included genuine Bosch LSU 4.9 wideband oxygen Sensor provides real-time fuel map learning
- (NEW) “Hidden Harness" wiring harnesses exits from the rear of throttle body for a clean appearance
- (NEW) Next Generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection
- Only four wiring connections required: Battery+, Battery-, Switched Ignition, and RPM
- (NEW) Integrated transmission kick down provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications
- (NEW) Sniper 2 throttle bodies are serialized in house, which provides each unit a birth certificate for an improved customer service and warranty experience in the event of any unit needing to be inspected
- Patent Pending
- (NEW) Onboard contactless magnetic TPS sensor ensures an accurate TPS reading
- Included clamp-on oxygen sensor kit ensures a leak free oxygen sensor installation with stainless steel T-Bolt clamps and a stainless steel weldable oxygen sensor flange
- (NEW) Wide Variety of tuning and gauge display interfaces: from a 3.5-inch full color LCD Handheld, 5-inch Digital Dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2
- Calibration wizard only requires that you answer a few simple questions about your engine to create a base map and begin self-tuning – no laptop required
- (NEW) Adaptors for other ignition types sold separately: 558-329 CD Box to Sniper 2, 558-330 MSD Pro Billet / Crank Trigger to Sniper 2
- Supports up to 650hp naturally aspirated or 575hp on boost with four 100 lb/hr injectors
- (NEW) Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires)
- (NEW) Cast-in fuel crossover from the primary to secondary fuel rail
- (NEW) Inputs and outputs consist of: 2x Ground Inputs, 2x Ground Outputs, 1x TPS output (0-5v), and 1x Tach Output
- All new design
- Sniper 2 is compatible with the complete Sniper EFI Ecosystem that includes plug-n-play Hyperspark Ignition systems (coil, ignition box and distributor), fuel systems (fuel lines, fuel pump hangers), multiple displays and more
- (NEW) Main harness includes plug-and-play HyperSpark distributor support, for integrated timing control, making your ignition setup hassle free
- (NEW) Optional Power Distribution Module (PDM) further simplifies wiring, especially when used in conjunction with an ignition system
- (NEW) Redesigned injector connector for improved reliability
- Available with fuel system kits: a complete fuel system consisting of: 20 ft. of 3/8 in. Vapor Guard Fuel Hose, Fuel Pump, fuel pressure regulator, filters, necessary hardware, and bulkhead fitting to return fuel into the tank
📖
About this product
Inline Pump - Without PDM - 3.5 in. Handheld
📋
Product Specifications
Accelerometer Support
No
Automotive Item Grade
Performance
Boost Control
No
Brand
Holley Sniper EFI
California Proposition 65 Chemical Name
4
CAN-BUS Support
Yes
Category
Air and Fuel Delivery
Cfm
800
Coast Guard Approved
No
Coil Per Cylinder Ignition Support
No
Datalogging Support
Yes
Distributor Included
No
Dry Nitrous Control
No
E85 Support
No
EGT Support
No
Emission Code
3
Finish
Black
Flange Style
4150
Forced Induction Support
Yes
Fuel Filter Included
Yes
Fuel Hose Included
Yes
Fuel Injectors Included
Yes
Fuel Pressure Regulator Included
Yes
Fuel Pressure
58.5 PSI
Fuel Pump Flow Rating
240 LPH
Fuel Pump Included
Yes
Fuel Pump Type
Inline
Fuel System
Master Kit
Grade Type
Performance
Height
3.28"
Hyperspark Ignition Kit
No
Ignition Timing Control
Yes
Individual Cylinder Fuel Corrections
No
Injector Size
100 lb/hr @ 58.5 PSI
Inlet / Outlet Size
9/16-18 Female O-Ring (AN 6)
Intake Manifold Included
No
Knock Retard Support
No
MAP Sensor
2 Bar
Max Horsepower Rating
650 Naturally Aspirated
Multi-Stage Nitrous Control
No
Part Type
Fuel Injection Conversion Kit
Power Distribution Module
No
Product Type
Sniper EFI
Progressive Nitrous Control
No
Self-Tuning
Yes
Sub Category
Service Kits
Throttle Position Sensor Included
Yes
Traction Control Support
No
User Interface
3.5 in Handheld
User-Tuneable
Yes
Warning
California Proposition 65
Warranty
Two Year Standard
Wet Nitrous Control
No
🛡️
Warranty & Compliance
Warranty
Two Year Standard, Extended via Product Registration
Country of Origin
US
Emissions Code
3
HS Code
8409915085
📐
Dimensions & Shipping
Product Dimensions
26.0 × 15.0 × 9.8 in
Shipping Dimensions
26.0 × 15.0 × 9.8 in
Weight
9811 g (9.81 kg)