USB A to USB C Cable - 2.0M - Suits Nexus Length: 2.0m (78")

Overview

Purpose-built 2-metre USB A to USB C connection cable engineered specifically for Haltech Nexus ECU communication. This isn't your standard phone charger cable – it's designed for reliable data transfer between your laptop and ECU during tuning sessions, firmware updates, and real-time logging without the dropouts that plague generic USB leads.

Technical Specifications

• Part Number: HT-070021
• Length: 2.0m (78 inches)
• Connector Type: USB A to USB C
• Application: Haltech Nexus ECU series
• Cable Standard: USB 2.0 specification

Why You Need This

Every tuner knows the frustration of a failed ECU connection mid-session. Generic USB cables cause intermittent dropouts, corrupted data transfers, and failed firmware flashes that can brick your ECU. This Haltech-engineered cable eliminates those risks with proper shielding and connector tolerances matched to the Nexus ECU's USB C port specifications.

The 2-metre length is specifically chosen for workshop practicality – long enough to route cleanly from your laptop to the ECU without tension, short enough to maintain signal integrity. Whether you're doing initial setup on an RB26 build, logging knock events on a 2JZ turbo conversion, or updating firmware on a Nexus R5 controlling a standalone LS swap, this cable ensures your connection stays solid throughout the session. We've seen too many builds delayed by communication failures using inferior cables – particularly during critical firmware updates where a dropped connection means starting over.

ECU & System Compatibility

Designed specifically for the Haltech Nexus range including Nexus R3, R5, and future Nexus models featuring USB C connectivity. This cable ensures optimal communication between your tuning laptop and ECU for all NSP software functions including real-time tuning, data logging, and firmware updates.

What's in the Box

• 1x USB A to USB C Cable - 2.0m length
• Haltech quality assurance documentation

Complete Your Build

Most customers setting up Nexus ECU systems also require additional sensors and wiring components for their specific application. Our technical team can recommend the complete sensor suite, injection harnesses, and ignition components needed for your build – whether that's a clean EFI conversion on a classic or a full race preparation. With UK stock on hand and expert pre-sales advice, we'll ensure your entire Nexus setup arrives together and works first time. Contact us for application-specific component recommendations tailored to your engine and power goals.